I had a bit of time this morning so I took another look at Frank.
Installed, battery, carb, filled rad again.
Fired right up, great oil pressure, running smooth.
For the very first time, I climbed on and pressed on the clutch.
Lots of rattling noise from the clutch, and I could not get it depressed enough to get into gear. When I finally pressed down hard enough, the tractor stalled. Released the clutch and fired back up.
Sooooooo.....I guess for now I won't be taking Frank for a test run.
Anybody have any ideas what might be happening? Maybe the clutch is shoe-packed? I'll have alook in the hand hole after lunch and try to see what is going on.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
'67 Loboy (Frank) Update
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
'67 Loboy (Frank) Update
Just Do It !
-
- 10+ Years
- Posts: 78
- Joined: Fri Aug 15, 2003 7:15 am
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
EZ:
I think my brother-in-law George, said that it cost him 40 or 50 bucks Cdn at the CaseIH Dealer for the graphite block bearing a couple of years ago, but I could be off by a bit. Ifn you want to upgrade, try NTN Bearings or Canada Bearing. Shouldn't be all that much.
I just checked on line at http://www.casetractorparts.com and this is what popped up
Code: 350921R11
Price: $53.62
Hope that helps. Oh that is US of course, so it would be around 80.00Cdn.
I think my brother-in-law George, said that it cost him 40 or 50 bucks Cdn at the CaseIH Dealer for the graphite block bearing a couple of years ago, but I could be off by a bit. Ifn you want to upgrade, try NTN Bearings or Canada Bearing. Shouldn't be all that much.
I just checked on line at http://www.casetractorparts.com and this is what popped up
Code: 350921R11
Price: $53.62
Hope that helps. Oh that is US of course, so it would be around 80.00Cdn.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Rudi,
You are truly a help.
Thanks for looking that up. That part number I'm guessing is the IH part number? I'll call Chas Richards with the number and see what he says for price. They are very good with shipping and availability. Plus I am now going to try sticking to IH parts as they are of better quality, especially carb parts, and gaskets. For the last couple weeks I was looking forward to this day when I would take Frank for the test run. What a downer when I could not even leave the shop. Looks like a split job now, and that's still just to test. The tranny looks very good inside, and it rolls nice. I don't expect too much wrong after this.
Hoping to get a digital camera soon, maybe under the tree, so I can share some pics.
You are truly a help.
Thanks for looking that up. That part number I'm guessing is the IH part number? I'll call Chas Richards with the number and see what he says for price. They are very good with shipping and availability. Plus I am now going to try sticking to IH parts as they are of better quality, especially carb parts, and gaskets. For the last couple weeks I was looking forward to this day when I would take Frank for the test run. What a downer when I could not even leave the shop. Looks like a split job now, and that's still just to test. The tranny looks very good inside, and it rolls nice. I don't expect too much wrong after this.
Hoping to get a digital camera soon, maybe under the tree, so I can share some pics.
Just Do It !
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Should get a new Throw-out bearing in the mail soon. $103Cdn.
The original is broken in a couple spots, that is, the graphite block, so it is not pushing evenly on all the clutch fingers. I also notice all 3 jamb nuts are missing off the adjusters, so I'll have to scare something up for those.
Merry Christmas to all,
If you're in the 'hood, drop by for a cup of Nog!
The original is broken in a couple spots, that is, the graphite block, so it is not pushing evenly on all the clutch fingers. I also notice all 3 jamb nuts are missing off the adjusters, so I'll have to scare something up for those.
Merry Christmas to all,
If you're in the 'hood, drop by for a cup of Nog!
Just Do It !
Who is online
Users browsing this forum: No registered users and 57 guests