Mon Feb 05, 2007 11:01 pm
I have a set of IH wheel weights that I am sure are not cub or A-B. I think they are front .The number stamped on them is 370885R1. Can some one tell me what they fit or where to look for information? Thanks Bob
Tue Feb 06, 2007 10:05 am
you can call your local case IH dealer and tell him the part number and he can look it up and it will tell you everything they fit.
at least most of the time they can.
Tue Feb 06, 2007 8:09 pm
cub front are part no 351371R1 cub rear are part no351374R1 inside are part no 368838R1
Tue Feb 06, 2007 10:23 pm
If they are front weights for the c, h, and m's.They will have 3 bolt holes and 3 nocthes on the outside to fit inside the wheels. I don't know the part #.I just know what they look like.
Tue Feb 06, 2007 11:24 pm
front weights are part no 6788D for an M tractor
Wed Feb 07, 2007 4:55 pm
i do not think that is a good part no it should be 370685R1 a 50 lb weight for a 140 amoung others
Wed Feb 07, 2007 8:38 pm
T jackson . You are probably right about the number. Unless the light is right I sometimes confuse 6 and 8. They look like they would be about the right size for a 140. Thanks for the info. Bob
Thu Feb 08, 2007 11:00 am
If it is 370685R1, it will have 4 bolt holes for mounting it.
Fri Feb 09, 2007 5:48 pm
Yes Jim it does have 4 holes. Thanks
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.