Farmall Cub

by **moe1942** » Sat Dec 13, 2003 11:19 am

My rockshaft has the helper spring bracket. Does anyone know where I can see a picture of the helper spring installed? Went to TM but they didn't show one installed.

Thanks

moe1942

by **Randy 64 Cub** » Sat Dec 13, 2003 1:59 pm

Look on the second page (you have to hit the "next" arrow) on TM's site. It's on the second page.
http://www.tm-tractor.com/gim/fhitch_002.htm

by **Jim Hudson** » Fri Dec 19, 2003 4:39 pm

Moe 1942 is talking about the rear rockshaft with the lever for a helper spring and I am to.http://www.tm-tractor.com/gdr/rearrock1_001.htm This has the bracket for a helper spring. and Moe and I want to see a picture of the setup with a helper spring are someone who has seen it and has a mental picture he can describe. We know about the front helper spring used on the fast hitch.

by **WKPoor** » Fri Dec 19, 2003 7:48 pm

I had one on my tractor and removed and sold it. I didn't feel it did anything for my setup. It mounts on the rock shaft and the left fender. Takes a special fender that is beefed up with a doubler and has mounting holes for the bracket. I still have the fender installed on my tractor. Not sure if I ever took any pics though. Bill

by **WKPoor** » Fri Dec 19, 2003 8:22 pm

Sorry Guys, I got messed up too when I described the front one.

by **moe1942** » Sat Dec 20, 2003 10:23 am

I messed up guys. I should have said rear rock shaft. Anyway, thanks for the replies. In the meantime, I found a picture of the setup. I sent it to Jim. WKpoor described it to a T. Sure would like to get a closer look at the setup. The one I sent Jim wasn't all that good. I think it was meant to be used on Cubs without touch control, but would assist the hyd's on Cubs with touch control.

I know Jim was having trouble lifting his scoop and I thought this might help him out.

by **WKPoor** » Sat Dec 20, 2003 9:16 pm

If you have hydraulics on your tractor the helper spring probably won't help you much. Been there done that. I believe the spring is helpful for manual lift system. That is why I sold mine, it wasn't doing anything to hepl the lift. Fastest most effective way to more lift is bigger cylinders, more pressure, or both. Bill

by **John *.?-!.* cub owner** » Sat Dec 20, 2003 11:30 pm

I think I am a little confused. the manual lift I am familiar with did not have a rear rockshaft. The rear shaft was part of the lever assembly, and it's helper spring did not attach to the fender, but to the angle iron that composed the lift frame.

picture compliments of Rudi's server

by **Jim Hudson** » Sun Dec 21, 2003 12:31 am

He is talking about this rear rockshaft. I have one just like it. Its not for the manual lift. The rockshaft which is a part of the manual lift is made diffrent.http://www.tm-tractor.com/gdr/rearrock1_001.htm
There is a front rockshaft which has a arm on it for a helper spring. It is used on the Fast Hitch. So a helper spring must help with the heaver fast hitch hardware.
Front rockshaft with helper spring lever on it
http://www.tmtractor.com/hy/1180_001.htm

by **Jim Hudson** » Sun Dec 21, 2003 11:20 am

Ok here it is and I think it has the right name.
http://www.tm-tractor.com/gim/drillplanter_001.htm

by **Jim Hudson** » Sun Dec 21, 2003 11:21 am

by **moe1942** » Sun Dec 21, 2003 1:56 pm

Jim,

Thanks for getting us squared away. Now that we have a correct picture I can see how that setup would be a great assist to the touch control.

Now if we can find someone with a OEM spring for comparison. Length, coil diameter and overall diameter.

George W, can you come to the rescue?

moe1942

by **George Willer** » Sun Dec 21, 2003 2:25 pm

moe1942 wrote:Jim,

Thanks for getting us squared away. Now that we have a correct picture I can see how that setup would be a great assist to the touch control.

Now if we can find someone with a OEM spring for comparison. Length, coil diameter and overall diameter.

George W, can you come to the rescue?

moe1942

I'll try.

I don't have a touch control with an assist spring, but Marilyn's hand lift is close by. The spring is under a little tension so the active length as measured isn't accurate...14 1/2". Based on wire size, it should measure 12 7/8 active when relaxed. 42 coils of .306" wire with an O.D. of 1.715.

I hope this helps.

by **Jim Becker** » Sun Dec 21, 2003 3:05 pm

George,
Your dimensions should be pretty close, since it is the same part number. The spring link is also the same part on both units (and it looks to me like the attachment points are the same location too). So a hand lift unit with the lever removed should be equivalent.

I have one of the hand lift units that somebody sawed the lever off of. Unfortunately, they also took the helper spring and related parts off.

by **moe1942** » Mon Dec 22, 2003 8:40 am

Thanks for all the great feed back.

If anyone has a spring they would like to part with please Email me so we can work out the details.

If anyone knows of a good suitable sub please point me in the right direction.

moe1942

Farmall Cub

Helper spring

Helper spring

Share On:

Helper spring

Helper spring

Re: Helper spring

Helper spring

Who is online