It looks like I may have inadvertently deleted the update on Poplarville implements. Sorry!
My disk has the number CL 5092 as a serial number. I believe Russ said his was CL 4001. I'm guessing the model number must be CL. There was no mention of model on the tag.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Poplarville Implements
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Poplarville Implements
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 251
- Joined: Sun Feb 09, 2003 10:05 pm
- Location: MS, Oxford
Thanks Guys,
I will be e-mailing tomorrow and perhaps calling monday. I sure hope they
come up with some info. I would like to know the specifics such as what type blades as mine needs replacing.
I don't know about the ones you guys have but mine surely cuts better than the fast hitch IH model that I have.
Will pass along anything I glean.
I will be e-mailing tomorrow and perhaps calling monday. I sure hope they
come up with some info. I would like to know the specifics such as what type blades as mine needs replacing.
I don't know about the ones you guys have but mine surely cuts better than the fast hitch IH model that I have.
Will pass along anything I glean.
- Dan England
- Cub Pro
- Posts: 3094
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: 71770
- Location: AR, Waldo
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
There should be a stamped plate riveted to the left side of the upright on the tongue. If you look close, you should be able to see it in this picture:
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- Dan England
- Cub Pro
- Posts: 3094
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: 71770
- Location: AR, Waldo
Poplarville Implements
I checked my disk this afternoon and discovered that it, too, is a Poplarville implement. The serial number is CL9177. I had not heard of this company before the post by Harold saying his was a Poplarville brand. Dan
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
This Ebay item looks like a drawbar to go with a Poplarville disk. It's located about 35 miles from me. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=11756&item=2583228966
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- George Willer
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
- Contact:
John *.?-!.* cub owner wrote:This Ebay item looks like a drawbar to go with a Poplarville disk. It's located about 35 miles from me. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=11756&item=2583228966
John,
I bid on that drawbar for Marilyn's Cub and won, and after sending payment I got thinking about Bigdog's picture of his disk and scrolled back to see it again. I then found your link to the item. I now suspect you were one of the other bidders. Do you have a need for the Poplarville crossbar?
I was thinking to use it to make up a mounting for a harrow I have, but could do it another way.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
Who is online
Users browsing this forum: Gary Dotson, Majestic-12 [Bot] and 23 guests