Farmall Cub Forum
Moderator: Team Cub
Yo's Dad wrote:Hey Guys:
Don't forget, the heat range of the plug is more important than the brand. All the plug has to do is light the mixture. If a plug lights the fire, then that's all that is needed.
Remember, a hot plug is recommended when the engine is used very little, for a short time or may be pumping a little oil. A cooler plug is recommended for a clean burning engine that works hard for extended time periods. Sometimes you just have to experiment with different ranges to see what works best for you.
And if I don't get another chance, Merry Christmas and Happy Holidays to each of you.
This says it very well but also lets not for get that these tractors are running on a fuel that they are not built for (unleaded).
With out lead or some other retardment it burns hotter .
If you mix this with a plug that is to hot you will have preing.and that leads to holes in pistons and burnt valves and it will make the rings wear faster as it burns the oil of of the cyl. walls & we all know what happens when metal runs on metal with no lube.
If it's been broken I did it.
If its not broken wait till I touch it.
- 501 Club
- Posts: 567
- Joined: Sun Aug 10, 2003 3:39 pm
- Location: Wellsville NY
I'll add one more variable to all of this. I use a middle grade unleaded gasoline (Amoco Silver), not because of spark knock, but because I do seem to have less spark plug fouling with it. Though the fact that my cub runs slightly rich, may be a factor affecting that.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
John *.?-!.* cub owner
- Team Cub
- Posts: 17759
- Joined: Sun Feb 02, 2003 2:09 pm
- Location: Mo, Potosi
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Hello everyone! In reading this thread I saw Jim Beckers comment about octane rating of 70. Is that a typo as my book says the cub is designed to run on 90 octane. Am I missing something?
- Posts: 27
- Joined: Tue Oct 07, 2003 9:21 pm
- Location: Pennsylvania, Mill Hall
Return to Farmall Cub
Who is online
Users browsing this forum: Bill, kevinplew, Ray 59, tkgriff and 7 guests