Farmall Cub

by **WCOX410** » Tue Dec 23, 2003 8:26 pm

When I bought my 1952 Cub the original wiring harness was not on the tractor. The tractor has battery ignition and voltage regulator. What would be the correct wiring harness for my cub. Also would the correct light switch be a 3 position or 4 position?

Thanks WCOX410

by **Wireharness** » Tue Dec 23, 2003 9:05 pm

Your Cub should have a 3 position light switch

by **Brent** » Wed Dec 24, 2003 1:20 pm

You should be able to get the harness at your Case IH dealer. They should be able to tell you which is the right one. Just let them know if your Cub has lights or not. If dealer can't help than OEM Tractor parts has a complete line of harnesses. You can reach them at: 1-800-283-2122

by **Lloyd Bigler** » Thu Dec 25, 2003 9:29 pm

There are 7 different main harness's for Farmall Cub and Cub Loboy Tractors.
Check with maloybig@msn.com they build the most complete line of wire harness and cables for Farmall over 800 different items.

by **johnbron** » Thu Dec 25, 2003 9:47 pm

Lloyd Bigler wrote:There are 7 different main harness's for Farmall Cub and Cub Loboy Tractors.
Check with maloybig@msn.com they build the most complete line of wire harness and cables for Farmall over 800 different items.

Does this outfit/company have a web page?.

by **Bigdog** » Fri Dec 26, 2003 7:30 am

Don't forget:
http://www.wiringharnesses.com

by **Wireharness** » Sun Dec 28, 2003 9:44 pm

Wireharness does not have a web site, only email maloybig@msn.com or phone 319-352-4142

Farmall Cub

Wiring Harness

Wiring Harness

Share On:

Who is online