Oil Seal

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Dave Irish
10+ Years
10+ Years
Posts: 149
Joined: Fri Feb 21, 2003 12:06 pm
Location: St. Catharines, ON. Canada

Oil Seal

Postby Dave Irish » Mon Dec 29, 2003 1:04 pm

Hello, I have to change my front oil seal. I need some advice on pulling the crank shaft pulley. I see there is also a bushing in there . Should this be replaced as well.


Thank you, Dave

User avatar
Jim Hudson
10+ Years
10+ Years
Posts: 1224
Joined: Sun Feb 02, 2003 1:11 pm
Zip Code: 28001
Location: Albemarle, North Carolina 28001

Postby Jim Hudson » Mon Dec 29, 2003 2:02 pm

I think the bushing (sleeve) will come with the seal if you get it from a case IH dealer. Most come off hard. Don't pull from the edge of pully or it will break the pully. A bearing seperator from a cheap tool supply place like Harbor Freight will work good. Soak with your favorite penetrating oil and it may come off but if it don't leave it alone awhile and tighten more. If all fails you will need some heat. I cannot get anything to come up in the archives on this board but there are lots of post on the other Cub board. http://www.atis.net/cgi-bin/FarmallCub.pl Do a search there.
Young man for work, old man for advice

User avatar
artc
Cub Pro
Cub Pro
Posts: 1860
Joined: Sun Mar 30, 2003 10:25 am
Zip Code: 06457
eBay ID: cmtelephone
Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M

In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450,
Location: CT, Middletown

Postby artc » Mon Dec 29, 2003 4:38 pm

something i copied a while back from Tim in CA. has a JC Whitney puller #81UJ2372T... 39.99. http://www.jcw.com.

looks like i'm needing one for the '48 cub. it's starting to drip like an old faucet.....so's the radiator
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org

User avatar
artc
Cub Pro
Cub Pro
Posts: 1860
Joined: Sun Mar 30, 2003 10:25 am
Zip Code: 06457
eBay ID: cmtelephone
Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M

In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450,
Location: CT, Middletown

Postby artc » Mon Dec 29, 2003 4:45 pm

looks good, but i don't see a 1/2 13 bolt option?

http://www.jcw.com/webapp/wcs/stores/se ... 01&Ntk=All
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org

User avatar
Bigdog
Cub Pro
Cub Pro
Posts: 24139
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Postby Bigdog » Mon Dec 29, 2003 5:07 pm

Art, take a short 1/2-13 bolt and drill a divot in the head. Thread it into the shaft and use the puller against it.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

User avatar
Jim Hudson
10+ Years
10+ Years
Posts: 1224
Joined: Sun Feb 02, 2003 1:11 pm
Zip Code: 28001
Location: Albemarle, North Carolina 28001

Postby Jim Hudson » Mon Dec 29, 2003 5:45 pm

I cannot tell if that JC Whitney job is big enough are not.
Image
Young man for work, old man for advice

Dave Irish
10+ Years
10+ Years
Posts: 149
Joined: Fri Feb 21, 2003 12:06 pm
Location: St. Catharines, ON. Canada

Postby Dave Irish » Wed Dec 31, 2003 4:04 pm

Thanks all, Have a New Year!


Dave


  • Similar Topics
    Replies
    Views
    Last post
  • Cub Oil seal
    by Jim K » Thu May 21, 2015 12:22 pm » in Farmall Cub
    2
    222
    by Bob McCarty
    Thu May 21, 2015 3:09 pm
  • Oil Seal Help
    by Jim Reid » Tue May 26, 2015 10:11 am » in Farmall Cub
    1
    171
    by Jim Becker
    Tue May 26, 2015 10:44 am
  • Fan seal
    by jim turner » Thu Sep 08, 2016 11:07 am » in Farmall Cub
    5
    255
    by jim turner
    Fri Sep 09, 2016 2:55 pm
  • PTO Seal?
    by sgraber » Wed Jun 15, 2016 10:27 am » in Farmall Cub
    6
    243
    by JohnMihevic
    Thu Jun 16, 2016 3:19 pm
  • PTO seal??
    by CraigKennedy » Sat Oct 25, 2014 6:49 pm » in Farmall Cub
    5
    257
    by ricky racer
    Sun Oct 26, 2014 1:17 pm

Return to “Farmall Cub”

Who is online

Users browsing this forum: inairam, muleboss and 5 guests