There are two different lengths of the 5/8" implement mounting bolts. The smart man down at the tractor store warned me to be careful when using the long ones as I could crack the casting. I was wondering what was the purpose of the long bolts. Is it for an easier fit when used with the "U" shaped hole on the mounting bracket ?( instead of the other "O" shaped hole) .
thanks
Stanley
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
implement mounting bolts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 66
- Joined: Tue Apr 29, 2003 10:18 am
- Location: Al, Huntsville
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Some of the implements have heavier (thicker) steel where it attaches to the tractor.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 876
- Joined: Sun Feb 02, 2003 11:19 pm
Who is online
Users browsing this forum: Dave Downs, ericofmaine and 46 guests