I looked at a Cub's stops and they appear to be made the same way, though I did not take one off to find out.
Barn_cub
A TC lever stop fix
Moderators: Barnyard, Team Cub
5 posts
• Page 1 of 1
A TC lever stop fix
by barn_cub » Wed Mar 21, 2007 8:01 pm
I discovered something interesting today while trying to repair broken thumb screws in my A's TC lever stops. I ground flat the broken screw so the stop would sit level on my drill press, and while doing so, I noticed that the part holding the broken screw was an insert in the aluminum stop body. Looking closer, it dawned on me that the reason for the large hole on the other side of the stop was to allow the insert to be removed with a punch. I placed the stop body over my bench vice with the vice opened enough to let the insert come out and punched it right out, removed the broken screw with vice grips , then placed the insert and stop body in the vice and pushed it back in. A small washer brazed in a screw completed my quick fix.
I looked at a Cub's stops and they appear to be made the same way, though I did not take one off to find out.
Barn_cub
I looked at a Cub's stops and they appear to be made the same way, though I did not take one off to find out.
Barn_cub
Cub herd, 2 Farmall A's, 2 AC's, 1 Ford, 1 JD
- barn_cub
- Cub Star
- Posts: 118
- Joined: Fri Feb 16, 2007 10:17 am
- Location: South Alabama, US
by Kodiak » Wed Mar 21, 2007 8:08 pm
A very useful "How to" thanks BC
I bought an old tractor all dusty and worn,
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
knew nothing about her just the year she was born
I washed her and greased her and painted her red
Now she lives happily right here in my shed.
HOME of THE STONETHROW CUBFEST
2007 Cub Tug Champion
-
Kodiak - Cub Pro
- Posts: 3398
- Joined: Fri Sep 24, 2004 9:02 pm
- Location: Ga. Gillsville
- Zip Code: 30543
- Tractors Owned: 1948 Cub
1955 Cub 
- Circle of Safety: Y
by Don McCombs » Wed Mar 21, 2007 9:07 pm
TM Tractor has exact duplicates of the originals.
Last edited by Don McCombs on Thu May 03, 2007 4:34 pm, edited 1 time in total.
Don McCombs
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
-
Don McCombs - Cub Pro
- Posts: 9489
- Joined: Mon Feb 03, 2003 6:45 am
- Location: MD, Deep Creek Lake
- Zip Code: 21550
- Tractors Owned: .
"1950 Something" Farmall Cub
1977 IH Cub w/FH
1948 Farmall Super A
1951 Farmall Super C w/FH - Circle of Safety: Y
broken thumb screws
by LARRY BALL » Thu May 03, 2007 4:01 pm
EUGENE IS RIGHT. THOSE LITTLE DRAWERS IN THE HARDWARE DEPARTMENT (NUT,BOLTS,SCREWS,ETC) AT LOWES. THEY HAVE A NICE ASSORTMENT OF THUMB SCREWS. 
LARRY BALL
- LARRY BALL
- Cub Star!!
- Posts: 298
- Joined: Thu Jul 17, 2003 10:49 pm
- Location: KATY, TEXAS
5 posts
• Page 1 of 1
Return to Engine, Clutch, Transmission and Hydraulics
Who is online
Users browsing this forum: No registered users and 0 guests
|
|