Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
As I said in my tractor purchase post, I got a set of rear tires to go with the tractor. But how about fronts? I have seen a few different styles on cubs. What would be correct for the '55. And can any farm tractor place order them?
I remember a long while back someone telling me that "in the old days" he used to mount his tractor tires himself. Is that true? can you mount a tractor tire (rear) by hand?
'55 Cub, (but always shopp'n!) '02 Kub, '57 Ford 640
I bought a set of front tires (rib) and tubes from Tucker-Tire and they were only $60.10 delivered Fed-Ex to my door. My local tire shop could go no cheaper than $110.00 and could not understand how Tucker could sell&ship them for less than his wholesale cost.
Then came Bronson
I will attempt to mount them myself. It should not be to much of a chore. If they give me too much of a hassle I will take them to the tire shop and let them do it. The ones that I have a hard time doing myself are the Tubeless ones trying to get them to seat but tubed is easy. I find the smaller the tire the harder to mount by hand, Like those (*&^%$#@#$%&) 4" rider mower tubeless`s.
Then came Bronson
It isn't really that difficult to do. I've done my own tire work for years, but sometimes take one to the tire shop just to get the beads broken. That's the hardest part... especially if the rims have rusted badly. I'm 69 and disabled so I suppose I may quit doing it in 5 years or so. Just so you know, the larger the tire, the easier. I have a pair of 13.6 x 38's on an M that will have to have the tubes replaced. I don't expect any problems.
Those 4.00 x 12's are a job for little kids and old ladies because they are so flexible.
The most affectionate creature in the world is a wet dog. Ambrose Bierce
Though not necessary by any means, this helps make the job real easy"
$35 at Harbor Freight.
Like George, I've changed a lot of tires with only hand tools. Not a difficult job and probably the worst part is getting the tire bead "broken" from the rim. Especially if it's been on there for a few years. That's one of the features I really like about the changer. Any "tire irons" you use should have well rounded edges to prevent puncturing tubes or gouging the sealing surface of the bead.
Mama's liquid dish detergent makes sealing new beads on the rims really easy. I might even buy my own bottle (especially if she catches me with her's again).
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
The tires or the kids?
Last edited by Jim Becker on Sat Jan 10, 2004 8:13 pm, edited 1 time in total.
I too have geared myself up to change my own tires. Purchased a wide variety of bead breakers and spoons and the manual changer Big Doogy showed pic of. The most useful tool however is the tube of tire lube I purchased at a local auto parts store. Came in a tub special order (lifetime supply for the house) butt I'm a little leary of dish soap. Had bad experience in the past with that stuff rusting metal real bad. This stuff is non-corrosive and real slippery for a while. The rubber absorbs it after installation and it won't corrode your rims. Makes installation 10xs easier. Also TireTek sells a solvent to aid in breaking beads that are stubborn. It slightly attacks the rubber compound just enough to allow the bead to give up on those rusted or just plain stubborn ones. Bill
When we changed the tire on the M, I just backed the H onto the the tire and rim. After doing this twice the came right off. Make sure the air is out of the tire though. Hopefully that is common sense, but I had better put in that disclaimer. We mounted two tires in about an hour. I have also hit an old tire with a sledge hammer and this also broke the bead.
I found an easy way to break the beads on tires. I use the outrigger on my backhoe for down pressure on the tire with a 2X4 next to the rim. I tried with the loader bucket but it just raises the front of the tractor off the ground on tough stuck beads.
Then came Bronson
I just picked up some tires today for the 54. I had told my dealer about Tucker, by the way Jim at Tucker is a great guy to deal with, and the $60.10 sounds about right. She sold me two tires and tubes for $65. As much as I like a great deal, for 5 bucks I'd rather support my dealer. I plan on mounting them myself, I do all my cub cadet tires by hand although that handy gadget from Harbor is lookin better all the time.
I use a brick hammer to break the bead on small tires (can't be new and sharp or it will damage the rubber) a little water helps it get through the bead. I was wondering about the 24's, I don't have any old tire hammers from my trucking days (thankfully).
BTW, is Tuckers price for the rear tires good? I've never had to buy them before.
I don't think the one Big Dog showed will work very well on lawn tractor tires, but they do sell one for about $20 that does do a fairly good job on them, also works great on the golf cart that I use to run around the place, though I would suggest going to your local auto parts store and getting a couple of small tire spoons to go with it. Most auto parts store also sell Rubber Lube at a reasonable price.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
John-I agree with the small spoons. I've got a large assortment of spoons from very large on down and the handiest are 2 little ones about 8" in length. I've found they will work on 4" to 38" rims quite well. Bill
Someone had a post on breaking beads with a â€œCâ€ clamp last summer. At the time I was changing a set of tires on a friends Cub and couldnâ€™t break them down the conventional way and tried the â€œCâ€ clamp way. The rear tire(s) bead broke down as soon as the clamp was turned in. I couldnâ€™t believe what I was seeing. The front tires were removed by my tire machine.
I just did some Cub Cadet tires and they were a little more stubborn with the â€œCâ€clamp method because, their rims are pretty wide.
I’m really good at doing nothing…With that said…I’m really, really good at doing nothing
johnbron, Now I can convince my wife that I really need that backhoe I've been wanting. I have to have it to break the beads on the cub tires
Who is online
Users browsing this forum: Cecil and 5 guests