IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
301 is a 12HP, That does not mean that the engine has not been changed out. I have seen 16 HP engines shoe-horned in them.
Got to love it, 16 Horses and a great gear drive tranny to run them through.
As I say on the Cub Cadet page,
Gears rule, Hydro's drool!!
Had a '57 Lo-boy, and loved it!! Will have another...
That is a 12 hp, and if the tractor is a gear drive it is a 1200. If it is a hydroststic drive, it is a 1250. That is provided the engine has not been switched from a 10hp to a 12hp at some point. The "kind" codes are still a bit in question on some of the Q/L's (Quiteline's as these model's of tractors were called by IH). The biggest problem with the Q/L's is the breakdown of the rubber engine mounts (called ISO mounts), and the flex center of the clutch disc, on the gear drives, cracking or breaking. That is usually caused by the ISO mounts and/or wear of the front of the driveshaft and or pilot bearing.
The biggest problem with the Q/L's is the breakdown of the rubber engine mounts (called ISO mounts), and the flex center of the clutch disc, on the gear drives, cracking or breaking.
Thatâ€™s what this tractor did two years ago. The center of the clutch pressure plate cracked and the rubber engine mounts were broken apart.
I blamed it on the kids â€œhot- roddingâ€ it when cutting the grass.
I’m really good at doing nothing…With that said…I’m really, really good at doing nothing
They could have helped, but in all fairness to them, the clutch is a very common problem (and expensive to repair) in the 800, 1000, 1200. The ISO mounts are a problem in all of them. 800, 1000, 1200, 1250, 1450, 1650. The least expensive fix for the ISO mounts is to use a set of Moog, auto swaybar bushings, but I will have to find the part number. Less than half the price, and works as good or better than the new replacement ISO's.
Jack I am not Ted but I looked the Moog kit number up for you off one of the other forums.They show Moog K-5252 available at Carquest and NAPA.
I do not own a wide frame much less one with iso mounts but these kits are said to be as good or better and much less in cost. Ralph
Fix it right and you only have to redo one time.
To post a picture you have to have it on a website or picture posting service somewhere. then click on the IMG button. Insert the link to the picture. Then click the IMG button again
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
They can't be posted directly, but the url from a picture hosted elsewhere can be. Copy the url into the message window and highlight it. Then press the "IMG" button above and it will add the codes to turn the picture mode on and then off.
The most affectionate creature in the world is a wet dog. Ambrose Bierce
Who is online
Users browsing this forum: No registered users and 0 guests