My starter appears to have been rebuilt. When trying to install the new starter switch I noticed the pole coming up out of the sarter base was to high to correctly mount the new starter switch. I was wondering if any one new how much the distance is from the base of the starter to the highest point on the pole should be. It would save me alot of guess work if the great cub fans of this site new?
P.S I can't express how much I enjoy reading the post's on this great web site. Wendell Cox
Starter Switch
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
4 posts
• Page 1 of 1
Starter Switch
by WCOX410 » Sun Jan 18, 2004 7:13 pm
-
WCOX410 - 10+ Years
- Posts: 8
- Joined: Sat Nov 08, 2003 8:30 pm
- Location: Hayden, Alabama
-
Jim Becker - Team Cub
- Posts: 11933
- Joined: Sun Feb 02, 2003 3:14 pm
- Location: MN
- Zip Code: 55319
- Circle of Safety: Y
by Jim Becker » Sun Jan 18, 2004 11:16 pm
I don't have one apart to look at or get a measurement off of. The reason I asked about the way the terminal stud was oriented is that I recall them as asymetrical with a fairly flat area for the switch's contact to hit. The switch contact moves in on a diagonal and the back side of the stud would probably stick out more than the flat side.
15/16 sounds like a lot.
15/16 sounds like a lot.
-
Jim Becker - Team Cub
- Posts: 11933
- Joined: Sun Feb 02, 2003 3:14 pm
- Location: MN
- Zip Code: 55319
- Circle of Safety: Y
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: CharlieK, Don McCombs and 3 guests
|
|