HELP...identify IH Cub

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

HELP...identify IH Cub

Postby Big O » Mon Jan 19, 2004 4:10 pm

I recently purchased an IH Cub. I was told it is a 1949 but I have seen some pics. of a '49 and they look different. The ones I saw have the exhaust going up through the hood, mine comes down and to the rear. There is not a hole in hood to run exhaust through and so I believe the underslung exhaust was original. I have several good pics. I could send to anyone that would like to see.
Thanks,Owen
User avatar
Big O
 
Posts: 14
Joined: Mon Jan 19, 2004 3:44 pm
Location: Breckenridge,Texas

Postby 71Nova » Mon Jan 19, 2004 4:16 pm

Well i am new around here and don't know much about Cubs but ours is a
'49 also and it has the underslung exaust also. There is no hole in the hood for exaust either.
71Nova
 
Posts: 15
Joined: Mon Jan 19, 2004 1:02 pm
Location: New Alexandria, Pa, USA

Postby Oscar Meier » Mon Jan 19, 2004 4:25 pm

Please post your serial number and the year can be identified.
48 CUB & 52 Super A
Oscar Meier
Cub Star!
Cub Star!
 
Posts: 237
Joined: Wed Jul 09, 2003 11:03 am
Location: Danville, Indiana

Postby Shopp'n Cubs » Mon Jan 19, 2004 4:25 pm

Owen, can you read the serial number?
'55 Cub, (but always shopp'n!) '02 Kub, '57 Ford 640
Shopp'n Cubs
Cub Star
Cub Star
 
Posts: 195
Joined: Fri Nov 14, 2003 12:45 pm
Location: Minnesota

Postby Mike Schmudlach » Mon Jan 19, 2004 6:56 pm

If you can not find the a serial number tag (many are missing) give us one of the casting codes from the tractor. For a 1949 the casting codes would end in a S but if it was an early 1949 they could end with a R.

If any of the codes are later then that either the part was replaced or you have a different year tractor.

Hope it helps, have fun with your new CUB.

Mike
30 + tractors including 2 French Super Cubs, French Cubs, 1963 Industrial Cub, 1955 Cub Highcrop etc...German and French built IH tractors and some bigger IH tractors. Of course I have about 20 IH trucks and an IH refridge in the Shop.
Mike Schmudlach
501 Club
501 Club
 
Posts: 568
Joined: Wed Feb 05, 2003 11:15 pm
Location: Brooklyn, Swissconsin

Postby Ron L » Tue Jan 20, 2004 9:40 pm

The plate with the serial number is located on the right side just behind where the steering shaft enters the steering gear box. If the plate is missing there should be 4 small rivit holes where it was attached. If it is there, try to read all the numbers and look it up in the FAQS section on the home page here. The serial numbers went from five digits to six digits during 1950's production.
Ron
Ron L
501 Club
501 Club
 
Posts: 661
Joined: Wed Mar 05, 2003 9:09 pm
Location: PA, Berwick
Zip Code: 18603
Tractors Owned: 1948 Cub
1955 Cub


Return to Farmall Cub

Who is online

Users browsing this forum: Glen and 10 guests