Lesson on Cranking?

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
10+ Years
10+ Years
Posts: 7
Joined: Tue Dec 09, 2003 1:53 pm
Location: MA, Acton

Lesson on Cranking?

Postby AmLaFrance » Mon Jan 19, 2004 10:33 pm

Hi Folks,
Enjoying this forum, I have been lurking for a few months.
I have a '49 I bought (came with a house) in '82, and I have been fixing
and using it since, for snow plowing, belly mower and hauling a trailer.
It's a lot of fun to use and work on.

I recently bought a crank from the fellow on ebay who is making new
ones. I have never crank started this or any other engine bigger than a
sandwich engine. Can you give me a short lesson or point me to the
right on-line link?

- 49 Cub

Jim Becker
Team Cub
Team Cub
Posts: 13459
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Mon Jan 19, 2004 11:35 pm

Go to Rudi's manual server (pointer on all of his posts) and look at a Cub Owner's Manual. It is explained there. Pay attention to how to hold the crank. Make sure your timing is set by the book.

Then go to http://www.binderbooks.com/ and buy a repro Owner's Manual.

  • Similar Topics
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: Bob Triplett, nyquil junkie and 3 guests