Throw out bearing

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Throw out bearing

Postby Jon-boy » Tue Jan 20, 2004 1:42 pm

I have a new throw out bearing where the hole is 1 1/4" and the shaft is 15/16" since I don't have a parts manual can you tell me is their is a bushing that will make up the difference? Thanks..
Jon-boy
10+ Years
10+ Years
 
Posts: 11
Joined: Tue Jan 13, 2004 4:16 pm
Location: Palo Cedro, CA

Postby George Willer » Tue Jan 20, 2004 1:57 pm

Jon-Boy,

That's normal. There is no bushing. The TOB is located by the yoke that carries it. Don't forget to put the zerk to the bottom so you can grease it. I just found one assembled upside down. I'm sure it was never greased. :cry:
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce
User avatar
George Willer
Cub Pro
Cub Pro
 
Posts: 7011
Joined: Sun Feb 02, 2003 9:36 pm
Location: OHIO, Fremont
Zip Code: 43420
Circle of Safety Award
Circle of Safety: Y


Return to Farmall Cub

Who is online

Users browsing this forum: Clownfish, Phil S., raystractors, TomE, Trent M and 4 guests