This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Carb idle tube
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Carb idle tube
Well it's been awhile, but I got back to working on Frank and his carburator. I needed to replace the idle tube in the carb. Got the broken end out of the top half. Just last nite I got my set of 4-48 taps to re-do the hole ($15Cdn for a set of 3 which includes the bottoming tap). I re-did the hole and threaded the new idle tube into the top half of carb. The fit has a very small amount of play in it. Anyone have an idea of some sort of Loc-tite that will stand up to gas, or would crazy glue work? Maybe epoxy?
Just Do It !
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
-
- 10+ Years
- Posts: 661
- Joined: Wed Mar 05, 2003 9:09 pm
- Zip Code: 18603
- Tractors Owned: 1948 Cub
1955 Cub - Location: PA, Berwick
- Contact:
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Who is online
Users browsing this forum: No registered users and 48 guests