draw bar bolts

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

draw bar bolts

Postby bjgravley » Fri Feb 06, 2004 7:49 pm

how tight should i tighten the drawbar bolts, also are all the bolts the same length,

Does any one know if the 47 cub with a hand lift , will the pto have to be turning if i add on a hyd. lift for the lift to work my 8-n is like like that my 61 cub i can use lift when the pto is off thanks
bjgravley
10+ Years
10+ Years
 
Posts: 131
Joined: Wed Nov 26, 2003 9:47 pm
Location: Surry,VA

Postby John *.?-!.* cub owner » Fri Feb 06, 2004 8:03 pm

Don't know torque settings, but I always used TIGHT. Yes there are different lengths depending on what you are attaching. Too long a bolt can break through teh casting into the final drive gear area resulting in aan oil leak.

All the cub hydralic systems drive off the motor, so the pto does not have to be running, unless you are adding some type aftermarket.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19560
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.


Return to Farmall Cub

Who is online

Users browsing this forum: Cecil, FCub S. E. Tn, Paul Van Benschoten, weslypype and 10 guests