Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
 by Ron » Sat Feb 07, 2004 9:24 am
Hi All,
I was having a problem with my hyd's not having alot of up pressure and having no down pressure(just bleeds down).
I deceided to overhaul the system. I bought the kit and began yesterday morning. All in all not too bad of a job.
The surprise came when I discovered the parts that are missing.
I'm missing :1.oil strainer 2. safety valve sleeve, 3. safety valve spring. 
I plan on ordering the missing parts and hope this is the cause of my hyd problems.
Sometimes it like a good mystery novel taking these old tractors apart.
Ron 1951 Farmall Cub
-
Ron
- Cub Star
-
- Posts: 80
- Joined: Sat Feb 08, 2003 11:23 am
- Location: Columbus, Georgia
by johnbron » Sat Feb 07, 2004 9:50 am
That is a job I will have to tackle in the future so I am anxious to hear how yours turns out when finished. Keep us posted when finished.
Then came Bronson
-
johnbron
- CubPro Emeritus
-
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Location: Puyallup, WA.
-
by John *.?-!.* cub owner » Sat Feb 07, 2004 11:11 am
I did one aobut a year ago, and the big thing is to make sure everything is clean (including the housing), and lube all the o'rings with Hytran when assembling. Sure can make a difference in how they work.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
-
John *.?-!.* cub owner
- Team Cub
-
- Posts: 17892
- Joined: Sun Feb 02, 2003 2:09 pm
- Location: Mo, Potosi
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Return to Farmall Cub
Who is online
Users browsing this forum: danovercash, John Hayes, ShineRunner and 4 guests
|
|
