Hello!
This is my first post, but have been reading about all the problems that have been solved by all the members.
My son and I have pulled off the touch control off of our 1964 cub due to leaking fluid. HAve the rebuild kit but fount that we need the boots also. I have seen in the past that people asking about the correct numbers to order the boots that work good on the cub. If anyone can tell me these numbers I would be greatful.
Thanks cccub
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Boots for touch-control system
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 24
- Joined: Fri Aug 29, 2003 10:36 pm
- Location: Gaffney, SC
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Boot for the cotrol valve is 364 832 R1. If your original boot on the lift piston was the little one that just goes over the knuckle use 364 833 R1. If you want a bigger one that goes over the lip on the casting, order one for a Super A. Unfortunately I don't have the part number for it, but a dealer should be able to find it with no trouble.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Dan England
- Cub Pro
- Posts: 3094
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: 71770
- Location: AR, Waldo
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Ernie, I got one from my dealer last year. If your local dealer can't/won't get one, get in touch with Ken Upike at Carter & Gruenwald ( http://www.cngco.com ). There were 2 different touch control units, so you will need the number off the one you have.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 24
- Joined: Fri Aug 29, 2003 10:36 pm
- Location: Gaffney, SC
Boots for touch-control
Ernie:
My cub has the 360 719 R1 block the Gasket kit was the 360713R92.
John:
Thanks for the information.
cccub
My cub has the 360 719 R1 block the Gasket kit was the 360713R92.
John:
Thanks for the information.
cccub
Who is online
Users browsing this forum: DBIZZELL and 39 guests