This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Boots for touch-control system

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
cccub
10+ Years
10+ Years
Posts: 24
Joined: Fri Aug 29, 2003 10:36 pm
Location: Gaffney, SC

Boots for touch-control system

Postby cccub » Sat Feb 07, 2004 10:38 pm

Hello!

This is my first post, but have been reading about all the problems that have been solved by all the members.

My son and I have pulled off the touch control off of our 1964 cub due to leaking fluid. HAve the rebuild kit but fount that we need the boots also. I have seen in the past that people asking about the correct numbers to order the boots that work good on the cub. If anyone can tell me these numbers I would be greatful. :roll:


Thanks cccub

SPONSOR AD

Sponsor



Sponsor
 

User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Sat Feb 07, 2004 11:19 pm

Boot for the cotrol valve is 364 832 R1. If your original boot on the lift piston was the little one that just goes over the knuckle use 364 833 R1. If you want a bigger one that goes over the lip on the casting, order one for a Super A. Unfortunately I don't have the part number for it, but a dealer should be able to find it with no trouble.
If you are not part of the solution,
you are part of the problem!!!

Ernie
10+ Years
10+ Years
Posts: 12
Joined: Sat Feb 22, 2003 6:57 am
Zip Code: 01521
Tractors Owned: 49 Cub
52 Cub
Location: Holland, MA

Hyd. Kit

Postby Ernie » Sun Feb 08, 2004 6:25 am

CCCUB,

Where did you get the rebuild kit, my local dealer says they are not available :?:

Ernie

User avatar
Dan England
Cub Pro
Cub Pro
Posts: 3094
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: 71770
Location: AR, Waldo

Postby Dan England » Sun Feb 08, 2004 8:08 am

cccub: Rudi has posted the parts manual for Super-A on his manual site. You should be able to find the correct number for the boot there. Dan

User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Sun Feb 08, 2004 10:28 am

Ernie, I got one from my dealer last year. If your local dealer can't/won't get one, get in touch with Ken Upike at Carter & Gruenwald ( http://www.cngco.com ). There were 2 different touch control units, so you will need the number off the one you have.
If you are not part of the solution,
you are part of the problem!!!

cccub
10+ Years
10+ Years
Posts: 24
Joined: Fri Aug 29, 2003 10:36 pm
Location: Gaffney, SC

Boots for touch-control

Postby cccub » Sun Feb 08, 2004 8:36 pm

Ernie:

My cub has the 360 719 R1 block the Gasket kit was the 360713R92.

John:

Thanks for the information.

cccub


Return to “Farmall Cub”

Who is online

Users browsing this forum: Bill V in Md and 26 guests