Aftermarket WFE for Super C ??

[CubitisNH]

Wondering if anyone on this forum has a picture of a Schwartz wide front end on a C or Super C? A friend recently bought a '50 C with what appears to be a Schwartz on it, but a previous "backyard engineer" had also mounted a GM power steering box and pump with linkage to tie-rods behind the axle. I need to see -hopefully- an original pic or a shot of this WFE with tie-rods out front to get an idea of what might be missing.
Thanks in advance for any help, Mike

[Brandon Webb]

Didn't know swartz made an aftermarket wide front that fit a C. All the Wide fronts I've seen are IH. Possible it could be modified off an M or H?

[CubitisNH]

I compared it to the Schwartz on my 400--front mount is the same width on both, the 400 has an additional mount to bottom of frame rails.
Mike

[Matt Kirsch]

I've seen a Schwartz wide front on a C/Super C at one time. The tierods are supposed to be in the back. Only the factory front end has them out front.

[Brandon Webb]

Schwartz wide fronts are alot better than IH ones. They turn sharper, plus with the tie rods in the rear, you don't damage them running into things.

[CubitisNH]

Thanks for the info,guys. It will likely be at RPRU for sale.....
Mike