This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Touch Control Parts

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Ron
10+ Years
10+ Years
Posts: 80
Joined: Sat Feb 08, 2003 11:23 am
Location: Columbus, Georgia

Touch Control Parts

Postby Ron » Wed Feb 11, 2004 7:04 pm

Hi,

After beginning a rebuilt on my system I discovered some parts were missing.
I'm in need of: 1. Cylinder block oil strainer
2. Safety valve piston
3. Safety valve spring
4. Safety valve sleeve

I have had some success in finding all but the Safety valve sleeve.
It seems that it is a discontinued part.

The Safety valve piston has to be ordered and cost $40.00 itself.

Do any of you know where would be the best place to try for this sleeve?

I've found most of what I need from CNGCO.

It might be easiser to find a broken unit and just get the parts I need from it.

Thanks,

Ron
1951 Farmall Cub

SPONSOR AD

Sponsor



Sponsor
 

rleggitt
10+ Years
10+ Years
Posts: 251
Joined: Sun Feb 09, 2003 10:05 pm
Location: MS, Oxford

Postby rleggitt » Wed Feb 11, 2004 7:38 pm

Hi Ron,

I was able to get all of my parts last year to completely o/h my lift
from my local Case IH dealer.

Hope this helps.

User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 17446
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Postby Don McCombs » Thu Feb 12, 2004 9:31 am

Ron,

Try http://www.tmtractor.com or http://www.jptractorsalvage.com for your discontinued parts needs.
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39

The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor

User avatar
Merlin
Cub Pro
Cub Pro
Posts: 940
Joined: Mon Feb 03, 2003 8:06 am
Zip Code: 00000
Location: Ponchatoula, La.

Postby Merlin » Thu Feb 12, 2004 11:59 am

Ron, I have a safety valve spring and sleeve in my pocket, but it belongs to George Willer. He got dibs on it. Maybe you could get in touch with him and make a deal. I can't seem to be able to get the piston out of the block though.

User avatar
George Willer
Cub Pro
Cub Pro
Posts: 7013
Joined: Sun Feb 02, 2003 9:36 pm
Zip Code: 43420
Circle of Safety: Y
Location: OHIO, Fremont
Contact:

Postby George Willer » Thu Feb 12, 2004 12:27 pm

Merlin wrote:Ron, I have a safety valve spring and sleeve in my pocket, but it belongs to George Willer. He got dibs on it. Maybe you could get in touch with him and make a deal. I can't seem to be able to get the piston out of the block though.


I don't know for certain that I need the sleeve and spring, so let's give Ron a crack at it. :D It's the piston and rod assembly and screen I really need. The small parts are more of a "just in case" thing. Does the piston move at all? As you must know, the assembly must come out of the head end. Maybe when you get feeling better you can try to loosen it by twisting? Maybe this is a job for WD-50? :wink:
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce

User avatar
Merlin
Cub Pro
Cub Pro
Posts: 940
Joined: Mon Feb 03, 2003 8:06 am
Zip Code: 00000
Location: Ponchatoula, La.

Postby Merlin » Thu Feb 12, 2004 4:04 pm

I must be missing something here. I don't see anything in the hole to grab on to but there is something at the bottom of the hole. It may have already fell out and got lost. Is that possible?

Ron
10+ Years
10+ Years
Posts: 80
Joined: Sat Feb 08, 2003 11:23 am
Location: Columbus, Georgia

Touch Control Parts

Postby Ron » Thu Feb 12, 2004 4:08 pm

Thanks for the information!!

If you would be willing to part with any of the parts you have please let me know.

I'm kind of like George in wondering just how much these small parts do.
But, in reading in the trouble shooting section, it describes some problems that may be caused by a stuck sleeve/piston. This sounds like some of the trouble I'm having with my system, and since these parts are missing from my system I'm hoping that this is my problem.

I really hope I don't have the same problem after searching for these parts.

I guess time will tell, it's suppose to have them so we'll see if they make a difference.

Thanks,

Ron
1951 Farmall Cub

User avatar
George Willer
Cub Pro
Cub Pro
Posts: 7013
Joined: Sun Feb 02, 2003 9:36 pm
Zip Code: 43420
Circle of Safety: Y
Location: OHIO, Fremont
Contact:

Postby George Willer » Thu Feb 12, 2004 4:46 pm

Merlin,

As far as the main piston, it should come out if you push on the connecting rod, and the whole thing come out as an assembly.

I remember smaller pistons I had to make a special tool to pull. One piston/sleeve in particular has an annular groove that can be used for pulling. The tool was a hairpin made from heavy wire with the tips bent outward. I had a picture of it at one time, but it's gone now.
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce

User avatar
Merlin
Cub Pro
Cub Pro
Posts: 940
Joined: Mon Feb 03, 2003 8:06 am
Zip Code: 00000
Location: Ponchatoula, La.

Postby Merlin » Thu Feb 12, 2004 5:05 pm

The rest of the parts are not a problem, but the parts Ron named that he needs are 15 258 E, (page 2 group 10), and 351 868 R1, (page 2 group 10). This hole is a dead end in the block with what I am assuming as part number 351 867 R1 still in it, the safety valve piston. Unless that is not what I am looking at at the bottom of that hole. ????

User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Thu Feb 12, 2004 7:30 pm

Merlin wrote:I must be missing something here. I don't see anything in the hole to grab on to but there is something at the bottom of the hole. It may have already fell out and got lost. Is that possible?


The manual reccomends using a snap ring tool to pull the small pistons. It worked for me by inserting it in the sleeve and holding it expanded as much as possible while twisting and pulling.
If you are not part of the solution,
you are part of the problem!!!


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 31 guests