This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Engine on!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- RedNed
- 10+ Years
- Posts: 481
- Joined: Mon Feb 03, 2003 6:32 pm
- Location: Long Island,New York
Engine on!
Put engine on this morning. http://www.hpphoto.com/servlet/LinkPhot ... 62&size=lg
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Lookin' good!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
-
- 10+ Years
- RedNed
- 10+ Years
- Posts: 481
- Joined: Mon Feb 03, 2003 6:32 pm
- Location: Long Island,New York
Thanks cub buddys. Stripped the block with paint stripper.Washed it with mineral spirits,stuck it a big sonic tank. Bubbled it up clean. Check the bore out.Had a nice lip on the edge,about .010. I thought..Put new std ring in to see ring end gap about (+-) .045 I decided to bore out to .020..New piston and rings .20..#3 and 4# still did not clean up all the way just a slight mark left on top.Could have went .040. I have to read my mic. better. As with all my parts on this cub.I painted each part by itself. Great idea, looks good. But the drawbacks are the paint chips.CNH 2150 with hardner added.Just one lock washer tears up the paint.Heres another pic.A special thanks to Jim Becker ( I put cork in the clutch housing) I thought they were Broken bolts when I started this Extreme makeover. http://www.hpphoto.com/servlet/LinkPhot ... c8&size=lg
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
DonnyM,
I just used paint stripper, alot of elbow grease, and a couple different wire wheels. I've got the whole engine to bare metal. On order are all the replacement gaskets, new rod bearings, front oil seal for the replacement timing cover, rebuild kit for the hyd. unit, etc.......all parts are from IH dealer in Southern Ontario. I'll be pecking away at this one for a while. I figure once I get the engine done the rest of it will be a walk in the park. Just a lot of paint remover and elbow grease. I'm looking at picking up a paint sprayer from Princess auto to do the CN Orange color. Rudi can't wait to see the finished product, and I don't want to let him down.
I just used paint stripper, alot of elbow grease, and a couple different wire wheels. I've got the whole engine to bare metal. On order are all the replacement gaskets, new rod bearings, front oil seal for the replacement timing cover, rebuild kit for the hyd. unit, etc.......all parts are from IH dealer in Southern Ontario. I'll be pecking away at this one for a while. I figure once I get the engine done the rest of it will be a walk in the park. Just a lot of paint remover and elbow grease. I'm looking at picking up a paint sprayer from Princess auto to do the CN Orange color. Rudi can't wait to see the finished product, and I don't want to let him down.
Just Do It !
-
- 10+ Years
Who is online
Users browsing this forum: No registered users and 27 guests