Final Drives

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
10+ Years
10+ Years
Posts: 236
Joined: Sat Mar 29, 2003 9:26 am
Zip Code: 70453
Tractors Owned: 1974 IH Cub
1975 IH Cub
MF 135
Ford 3000
12 D Harrow Plow
151 Disc Plow
Circle of Safety: Y
Location: LA, Pine Grove

Final Drives

Postby LYNYRD » Sun Feb 15, 2004 4:19 pm

I have some striped out bolt holes on my final drives, do these have to be removed to be repaired. What is the best thread repair for theses holes I believe they are 5/8 by 11 tpi. thanks

Donny M
10+ Years
10+ Years

Postby Donny M » Sun Feb 15, 2004 5:36 pm

I would think that a heli-coil repair could be done right on the tractor. Make sure you drill square...maybe a drill jig that sits flat on the casting would be in order. But maybe someone else on the board has some experience with this.

User avatar
Dan England
Cub Pro
Cub Pro
Posts: 3094
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: 71770
Location: AR, Waldo

Final Drive

Postby Dan England » Sun Feb 15, 2004 7:08 pm

Charles: I used a heli-coil in doing the same repair on a final drive. I did this a couple of years ago and have had no problems up to this time. It should work for you. Dan

10+ Years
10+ Years

Postby WKPoor » Sun Feb 15, 2004 7:23 pm

Charles- On high end stuff like aircraft heli-coils are installed on parts when they are new. It makes the threads more durable and strong then they would otherwise be in the base material. My own experience is they not only provide a good repair butt the repair may be better than it was originally, if done correctly.

  • Similar Topics
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: Arthur Luke and 6 guests