The center blade began life as a regular cat. 1, 3pt rear mount blade from Central Tractor Supply. It measures 13" high and 72" wide. I used only the blade part and fabricated all new mounting hardware in order to mount it under the cub. It also mounts to the final drives/fasthitch sockets where the rear cultivators would plug in. NOTE the black arrows in photo. This mount can be left in place, and still allow fast hitch operation for plowing, discing, carry all, etc.
See photo below.
The blade can be stored in the up position using the eye bolt inserted into the torgue tube just below the clutch pedal. NOTE the black arrow in photo.
I have had a little problem with my photo hosting site today. Let me know if you can't view the photos.