This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New Cub On The Block
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 6
- Joined: Tue Feb 24, 2004 6:12 pm
- Location: Loganton Pennsylvania
New Cub On The Block
I just wanted to say Howdy to all you Cub Junkie's. Being the new cub on the block I would like to share a story with you all about becoming a Cub owner this past year! In 1950 my Wife's Grandfather purchaced a new cub off the show room floor,In 1970 he sold the cub to a truck patch farmer several mile's away, then in 1979 my Father purchaced the Cub and then sold it to me in 2003. So as you can see this Cub has been in both side's of My Wife's and myself's family, And here it is to stay. Cub-Hoser [/img]
- johnbron
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
-
- 10+ Years
- Posts: 661
- Joined: Wed Mar 05, 2003 9:09 pm
- Zip Code: 18603
- Tractors Owned: 1948 Cub
1955 Cub - Location: PA, Berwick
- Contact:
Cub-Hoser. Welcome aboard. Nice story. It must be something special to not only be a Cub owner, but to know it's history and be connected. If your experienced with Cubs, some of us could use the imput. If not, then this board is the perfect place to learn (starting with the "announcement" at the top of the posts). Again, welcome.....
Ron
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Welcome aboard Cub-Hoser! Good to see new cubs on the board.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 6
- Joined: Tue Feb 24, 2004 6:12 pm
- Location: Loganton Pennsylvania
Thank's for the warm welcome
Thank-you for the warm reception, The answer to your question about cub's, I know my way around the little guy's but we mostly had super A's and H's. My Father had a repair shop for small tractor's and small gas engine's for a good many years until his health failed, As a matter of fact when i got the cub the engine top end was torn down and with his health he couldnt remember how to put in back together, so that's when i purchaced it to keep it in the family. Once again Thank you for listening Cub-Hoser
- parts man
- 10+ Years
- Posts: 619
- Joined: Wed Jul 30, 2003 9:41 pm
- Location: Sussex N.B. Can.
- Contact:
Who is online
Users browsing this forum: Tractor Rod and 55 guests