OK, I bought this 1949 on eBay after I had went over to look at it. I had previously posted pics of the planter and cultivators, but now she's all home. The tractor starts and runs real well, with no smoke. There is a weld on the block, right side, down at the pan seal below the radiator hose, just behind the serial number plate. It leaks oil. The transmission is quiet in all gears. It has a magneto, which is new to me. I didn't take any detailed pics of the tractor yet.
This is Dad starting it up.
http://photos.cubfest.com/albums/userpics/10283/S6300063.JPG
Here is the planter, which I had posted before.
http://photos.cubfest.com/albums/userpics/10283/S6300005.JPG
This is the cultivator, also posted before.
http://photos.cubfest.com/albums/userpics/10283/S6300017.JPG
Here is the plow. Looks to have a brand new (point or share?).
http://photos.cubfest.com/albums/userpics/10283/S6300066.JPG
http://photos.cubfest.com/albums/userpics/10283/S6300067.JPG
Sickle mower. Sitting out behind the garage grown up in weeds. I did find the PTO pulley, nicely stored inside.
http://photos.cubfest.com/albums/userpics/10283/S6300070.JPG
http://photos.cubfest.com/albums/userpics/10283/S6300023.JPG
Here's the disk. Good enough to work it as is.
http://photos.cubfest.com/albums/userpics/10283/S6300068.JPG
http://photos.cubfest.com/albums/userpics/10283/S6300069.JPG
And last but not least, here's the Woods 59. All it really needs is a bath.
http://photos.cubfest.com/albums/userpics/10283/S6300064.JPG
http://photos.cubfest.com/albums/userpics/10283/S6300065.JPG
I was looking for another Cub to reduce the amount of implement swap I had to do. Now look what I've done! I wish I could get another one. Maybe someday.
Thanks for looking.
Trent
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
My new '49 is home. Here's the haul, with pics.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Trent M
- Cub Pro
- Posts: 3337
- Joined: Wed Aug 09, 2006 6:21 pm
- Zip Code: 62859
- Circle of Safety: Y
- Location: Illinois Southern
My new '49 is home. Here's the haul, with pics.
Trent McPeak
-
- 10+ Years
- Posts: 357
- Joined: Mon Jul 11, 2005 7:25 pm
- eBay ID: huntingpal
- Location: southern indiana/ spencer county
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Nice haul Trent!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- John(videodoc)
- 10+ Years
- Posts: 6547
- Joined: Mon Jul 25, 2005 10:16 pm
- Zip Code: 61944
- Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
-(Woods 59")
Corn Stalk Cutter
23a Disc
&
2005 Mahindra w/FEL - Circle of Safety: Y
- Location: IL, Paris just off of Interstate 70
- Contact:
-
- Cub Pro
- Posts: 7506
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
- KETCHAM
- 10+ Years
- Posts: 5880
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
- Contact:
- Trent M
- Cub Pro
- Posts: 3337
- Joined: Wed Aug 09, 2006 6:21 pm
- Zip Code: 62859
- Circle of Safety: Y
- Location: Illinois Southern
Thanks guys. Its sure gonna be fun!
Kevin, I think the consensus on the planter is that its pretty much complete. I don't think it ever had any markers with it. The bottom of the fert. hopper has a lot of rust damage. I need to clean it up a little and see what's there. I plan to plant next spring so I'm gonna get into it this fall/winter. I'll pm if I have questions, thanks!
Most of this stuff is complete. Some things I can think of that I got besides what's in the pictures:
Swinging brawbar with anchor bar.
Plow depth adjuster with dogbone and eyebolt.
Rear rockshaft with rod.
Flat belt pulley.
A spare TC pump.
An old grill.
A rear PTO cover plate for a Danco mower.
A rear PTO pulley, I would guess was with that Danco.
(I figure they mowed with the Danco before they got the Woods. I didn't see anything else from the Danco.)
I would like to express my sincere thanks to the Members on this site for all your valuable knowledge and help you have given to me. The gentleman I bought it from didn't know much about it (it was his father's), so it was pretty much up to me to recognize what went with the Cub. I couldn't have done it without y'all.
Thanks again,
Trent
Kevin, I think the consensus on the planter is that its pretty much complete. I don't think it ever had any markers with it. The bottom of the fert. hopper has a lot of rust damage. I need to clean it up a little and see what's there. I plan to plant next spring so I'm gonna get into it this fall/winter. I'll pm if I have questions, thanks!
Most of this stuff is complete. Some things I can think of that I got besides what's in the pictures:
Swinging brawbar with anchor bar.
Plow depth adjuster with dogbone and eyebolt.
Rear rockshaft with rod.
Flat belt pulley.
A spare TC pump.
An old grill.
A rear PTO cover plate for a Danco mower.
A rear PTO pulley, I would guess was with that Danco.
(I figure they mowed with the Danco before they got the Woods. I didn't see anything else from the Danco.)
I would like to express my sincere thanks to the Members on this site for all your valuable knowledge and help you have given to me. The gentleman I bought it from didn't know much about it (it was his father's), so it was pretty much up to me to recognize what went with the Cub. I couldn't have done it without y'all.
Thanks again,
Trent
Trent McPeak
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Who is online
Users browsing this forum: No registered users and 51 guests