Mon Mar 01, 2004 10:07 pm
I'm still playing with adapting the Allis-Chamlers gear box to the cub to slow down and reverse the PTO but I need to know the distance from the center of the PTO shaft to the inside of the left (viewed from rear) fender to see if I have enough clearence. Since my cub is in pieces I can't measure it. Thanks!
Mon Mar 01, 2004 10:28 pm
It should be the same as a regular Cub, 5 1/2". I'm sure you will want to mount the gearbox so the offset is as far as possible to the right. You may have to add an elbow to the vent.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.