This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Hole size in crankshaft end

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
User avatar
Steve Ruddy
10+ Years
10+ Years
Posts: 178
Joined: Sat Feb 28, 2004 2:16 pm
Location: Guerneville CA
Contact:
Contact Steve Ruddy

Hole size in crankshaft end

Postby Steve Ruddy » Thu Mar 04, 2004 10:16 pm

What size bolt will fit in the crankshaft end. I'm trying to pull and install the fan drive pulley. Can't find any tutorials doing a search.
Steve Ruddy
Guerneville CA
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Cub-Bud
Team Cub Guide
Team Cub Guide
Posts: 3544
Joined: Sun Feb 02, 2003 6:30 pm
Zip Code: 38658
eBay ID: Cub-Bud
Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
Circle of Safety: Y
Location: MS, Pope

Postby Cub-Bud » Thu Mar 04, 2004 10:22 pm

If I am not mistaken, a 1/2 bolt is the size that goes in the crank.
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"

Greg Norman
Top
User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Thu Mar 04, 2004 10:30 pm

It's 1/2 x 13. If you will do a search for pulley removal, there are several notes aobut removing and reinstalling. Do NOT pull directly on the pulley flange, it WILL break.
If you are not part of the solution,
you are part of the problem!!!
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: Glen and 24 guests