Hole size in crankshaft end
Moderator: Team Cub
3 posts
• Page 1 of 1
Hole size in crankshaft end
by Steve Ruddy » Thu Mar 04, 2004 10:16 pm
What size bolt will fit in the crankshaft end. I'm trying to pull and install the fan drive pulley. Can't find any tutorials doing a search.
Steve Ruddy
Guerneville CA
Guerneville CA
-
Steve Ruddy - Cub Star
- Posts: 174
- Joined: Sat Feb 28, 2004 2:16 pm
- Location: Guerneville CA
by Cub-Bud » Thu Mar 04, 2004 10:22 pm
If I am not mistaken, a 1/2 bolt is the size that goes in the crank.
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"
Greg Norman
Greg Norman
-
Cub-Bud - Team Cub
- Posts: 3201
- Joined: Sun Feb 02, 2003 6:30 pm
- Location: MS, Pope
- Zip Code: 38658
- eBay ID: Cub-Bud
- Circle of Safety: Y
by John *.?-!.* cub owner » Thu Mar 04, 2004 10:30 pm
It's 1/2 x 13. If you will do a search for pulley removal, there are several notes aobut removing and reinstalling. Do NOT pull directly on the pulley flange, it WILL break.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
-
John *.?-!.* cub owner - Team Cub
- Posts: 17893
- Joined: Sun Feb 02, 2003 2:09 pm
- Location: Mo, Potosi
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: John *.?-!.* cub owner, tnestell and 4 guests
|
|