Got this in a E-Mail. Trying to help him out. Who was building and selling these? I sent him all I could find in the archives pictures and all.
hi Jim.
I am located in chesterville, maine & have a 1947 cub. am looking for engine stands (fees 142-1) or some prints or drawings to fabricate same. would appreciate any info. you can give me. thanks
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Splitting stands
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Jim Hudson
- 10+ Years
- Posts: 1224
- Joined: Sun Feb 02, 2003 1:11 pm
- Zip Code: 28001
- Location: Albemarle, North Carolina 28001
Splitting stands
Young man for work, old man for advice
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Bob Grootegoode was making them. Said he wasn't going to make any more after the last batch he made. Don't know if he sold them all or not. Might find him on the ATIS list.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 251
- Joined: Sun Feb 09, 2003 10:05 pm
- Location: MS, Oxford
Hi,
RE: Tractor Stands
Bob's e-mail address was at the time I got mine:
groot123@aol.com
Just a note: Being overly careful, I guess but I made a slight
modification. I set mine at the proper height on a concrete floor and then I drilled a 1/4 in. hole through the the outer and inner parts and inserted
a 1/4 in. pin. Sure hope Bob doesn't mind.
RE: Tractor Stands
Bob's e-mail address was at the time I got mine:
groot123@aol.com
Just a note: Being overly careful, I guess but I made a slight
modification. I set mine at the proper height on a concrete floor and then I drilled a 1/4 in. hole through the the outer and inner parts and inserted
a 1/4 in. pin. Sure hope Bob doesn't mind.
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
If Bob is not going to build anymore, it sure would be nice if he would donate a copy of the drawings for the Implements and Parts Sketches section. I hope somebody might mention that to him in passing.......
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 251
- Joined: Sun Feb 09, 2003 10:05 pm
- Location: MS, Oxford
Hi Jim,
Just got an e-mail from Bob today and he indicated that he was not going
to make any more, however, he still has some few left.
Groot123@aol.com.
Just got an e-mail from Bob today and he indicated that he was not going
to make any more, however, he still has some few left.
Groot123@aol.com.
-
- 10+ Years
- Posts: 76
- Joined: Sun Feb 02, 2003 8:01 pm
- Location: Wilsonville, Al
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
You never told us John, How does that parts washer work on dishes?
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Who is online
Users browsing this forum: No registered users and 51 guests