crankshaft pulley install

Farmall C & Super C Tractors, 1948-1954

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

crankshaft pulley install

Postby dw » Tue Jul 31, 2007 9:52 pm

What is the correct way of installing a pulley on a c123 that is a swedge fit, without beating it on and damaging the crank??? Can't use heat , it will melt the front seal. :? :?
dw
5+ Years
5+ Years
 
Posts: 38
Joined: Fri Dec 09, 2005 11:43 pm

Postby John *.?-!.* cub owner » Tue Jul 31, 2007 10:07 pm

service manuals say to place it in boiling water for several minutes. If it has a threaded center hole, sue a piece of threaded rod, with some spacers to pull it on.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19564
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.


Return to Farmall C & Super C

Who is online

Users browsing this forum: No registered users and 2 guests