This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub low boy blade (L54)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Paul, I checked mine and it is indeed for a lo-boy. I have it mounted on a standard cub. I have used it for snow and it works fine. The difference is that with the blade on the ground, you are pushing down from the tractor rather than just forward. So, it does tend to want to dig in, even with skids on the blade. I also believe (can't remember for sure) I have the connections to the rockshaft on backwards in order to get enough lift on the blade.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
Hi Bigdog
I Hope you are doing well. I read your post, and was wondering two things. 1 Do you have a complete lowboy setup which I think is the L54, or do you have the long axle hanger like on my mixed up set up where the axle hangers are 17 1/2 inchs long and not 11 inchs long the way they should be for the L54? 2 Did you ever use it or set it up as a grader blade setup? THANK YOU !! PAUL K. in N.H.
I Hope you are doing well. I read your post, and was wondering two things. 1 Do you have a complete lowboy setup which I think is the L54, or do you have the long axle hanger like on my mixed up set up where the axle hangers are 17 1/2 inchs long and not 11 inchs long the way they should be for the L54? 2 Did you ever use it or set it up as a grader blade setup? THANK YOU !! PAUL K. in N.H.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Paul, mine is a complete lo-boy setup. I have not mid-mounted it, but I don't think it would be a problem mounted that way.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
-
- 10+ Years
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
Who is online
Users browsing this forum: ridinhi and 38 guests