Tue Mar 09, 2004 8:32 pm
Hi, I'm new to this forum, and new to Cub's as well. I just got a 1962 the other day, and I'm looking into a hitch for it. I saw a post here from a few months ago about some specs/dimensions for a 3 pt . Do they exist yet ? If so how can i find them ?
By the way, this cub is in very good shape, nice tight little tractor that could be cleaned up a little, but came with a front grader blade. Works quite well on my driveway.
Tue Mar 09, 2004 8:40 pm
Good to see some more Maryland folk showing up here! Don't have any experience with 3 pt on a Cub, but others here do. Here's a company that makes a kit for the Cub and LoBoy.
Don't be a stranger,
Tue Mar 09, 2004 8:46 pm
Thanks for the welcome, from what i've seen here this is a good forum , LOTS of info on cub's and some good links as well.
I already checked with worksaver, they have two 3 pt kits available, but they are $630 and $650 PLUS freight ! a bit too pricey for my taste. I can probably get one made nearby for about half that. (i hope)
Tue Mar 09, 2004 8:48 pm
Jerry. Welcome to the board. Fast hitches were being discussed here on the board recently. Maybe you could do a search for that.
If you have a regular cub and not a lowboy, and a cub 54A blade, that could also be mounted under the belly like a grader. For stone driveways, you would have much better control over the leveling and smoothness.
Tue Mar 09, 2004 10:15 pm
I too was looking for a 3 point. I looked at Worksaver but thought it was too costly. I had mine made by a local guy. Works great!. It's set up for a Category 1 hitch. I have since replaced the top bent turnbuckle with a chain attached with bolts at each end. I still need to give specs to Rudi so he can post it on his site (one of these days). As you can see it's just bolted to the drawbar. The 5 foot landscape rake is from Worksaver. Let me know if you need the details.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.