Our friends at Alumaloy (Low temp alum. repair and welding) have come up with two new products: one for steel and one for cast iron.
Both are applied with a propane or Mapp gas torch and are said to melt at 500 deg. F.
I wouldn't recommend one of these for a structural repair; but, they might be useful for the repair of of stripped threads. Drill out and retap. I don't know - I've used alumaloy to fix a couple of aluminum parts and it worked just like they advertise. I can say a pound and a half of the sticks will last you about 50 years.
I was suprised because I have seen the infomercial for aluminum a couple of times; but, I have never seen the steel and cast products advertised.
You can get more info on their web site: Alumaloy.com
Oscar
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Alumaloy
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Oscar Meier
- 10+ Years
- Posts: 237
- Joined: Wed Jul 09, 2003 11:03 am
- Location: Danville, Indiana
Alumaloy
48 CUB & 52 Super A
Who is online
Users browsing this forum: No registered users and 48 guests
