How does one remove the nameplates on a Cub so outfitted. Mine is a 1960 Lo-Boy and has aluminum nameplates on both sides. Want to remove them to paint and want to re-install after painting.
Nameplates are attached through sheet metal with fasteners on the inside.
What will I use to refasten?
Thanks
Kajun
Removing and re-installing Cub nameplates
Moderator: Team Cub
5 posts
• Page 1 of 1
Removing and re-installing Cub nameplates
by kajun » Thu Mar 11, 2004 11:57 am
- kajun
- Cub Star
- Posts: 84
- Joined: Mon Jul 14, 2003 4:02 pm
- Location: St. Francisville , La
- Zip Code: 70775
by PAUL K. in N.H. » Thu Mar 11, 2004 12:06 pm
Kajun
I have a 61 standad cub, and have not used them yet but got some of those fasteners new from my IH dealer. Paul K.in N.H.
I have a 61 standad cub, and have not used them yet but got some of those fasteners new from my IH dealer. Paul K.in N.H.
- PAUL K. in N.H.
- 501 Club
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
by George Willer » Thu Mar 11, 2004 1:47 pm
Kajun,
Whatever you do, don't try to pry them off from the outside. Tap the end of the pins a little at a time from the inside and you'll avoid breaking them off. After the pins are out, the fasteners can be removed by squeezing them with pliers. I've never removed one that couldn't be re-used.
Whatever you do, don't try to pry them off from the outside. Tap the end of the pins a little at a time from the inside and you'll avoid breaking them off. After the pins are out, the fasteners can be removed by squeezing them with pliers. I've never removed one that couldn't be re-used.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
George Willer - Cub Pro
- Posts: 7011
- Joined: Sun Feb 02, 2003 9:36 pm
- Location: OHIO, Fremont
- Zip Code: 43420
- Circle of Safety: Y
by PAUL K. in N.H. » Thu Mar 11, 2004 2:50 pm
I was just trying to be of some help. I don't have the knowledge that these other gentlemen have and I struggle with mental illness to the point I almost can't function. I just know that if you needed some, the dealer still have them (the fasteners) Paul K.in N.H.
- PAUL K. in N.H.
- 501 Club
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
Removing and re-installing Cub nameplates
by kajun » Fri Mar 12, 2004 12:04 pm
Guys :
Many thanks for the help. Dealer does have . I also appreciate the sugg./guidance about how to get them off.
kajun
Many thanks for the help. Dealer does have . I also appreciate the sugg./guidance about how to get them off.
kajun
- kajun
- Cub Star
- Posts: 84
- Joined: Mon Jul 14, 2003 4:02 pm
- Location: St. Francisville , La
- Zip Code: 70775
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: Dave F., raystractors and 7 guests
|
|