This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
super c fliud gauge
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 38
- Joined: Fri Dec 09, 2005 11:43 pm
super c fliud gauge
Is there an inexpensive type gauge that can be used for the touch control fluid inplace of the original??
-
- 10+ Years
- Posts: 613
- Joined: Mon Feb 03, 2003 1:18 pm
- Zip Code: 27055
- Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35 - Circle of Safety: Y
- Location: NC, Yadkinville
I think the short answer is no. However, on our 100 we replaced the gauge and it hardly ever moves. Unless you are using a hydro-creeper I can't see as it is really needed. You should hear the pump laboring if the hydraulics bind up. Many tractors have run for years with that gauge rusted out. In fact, I have never see on working, except on a restoration.
The four most expensive words in tractor restoration: "We might as well..."
-
- Team Cub Mentor
- Posts: 20372
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 5 guests