Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
When I removed the generator to have it rebuilt I wrote down how it was hooked up. mine came off as field was to the inside of tractor and armature was to the outside of tractor, I have looked at the Q&A section of this sight and found the wireing digram, if the diragram is correct it showes the armature to the inside and field to the out side.
Just would like to know which terminal is the field and which is the armature.
- Posts: 24
- Joined: Fri Aug 29, 2003 10:36 pm
- Location: Gaffney, SC
There is usually an A and F stamped in the case. Look hard, they may be filled up with paint.
The four most expensive words in tractor restoration: "We might as well..."
- 501 Club
- Posts: 546
- Joined: Mon Feb 03, 2003 1:18 pm
- Location: NC, Yadkinville
Return to Farmall Cub
Who is online
Users browsing this forum: Dennis, RUSSALL, Smokeycub and 10 guests