Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
9 posts • Page 1 of 1
I need your help again. I looked in Rudi's info and went back thru the postings, but I cannot find the info I thought I'd seen here before. I have a leak at the base of the fuel tank, where the sediment bowl unit threads into the tank. Any suggestions please? Thanks again, Bob
If the leak is at the threads, try some fuel resistant teflon tape on the threads. Should be available at any good auto parts store.
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
Bob, one thing to be careful of using teflon tape, is be sure you don't let a corner get over the fuel inlet, or a little piece tear loose that can go down the fuel system. I'v gotten to where I use teflon paste a lot of the time. You can get it at most hardware or plumbing supply stores. Many auto parts stores also carry it.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
I got some thread sealant in a tube at napa. The package reads napa /permetex thread sealant. It is high performance automotive grade. The tube is green and reads Loctite industrial grade pipe sealant with teflon #565. The tube is 1.69 FL. OZ. In big letters on the tube it reads PST. Paul K. in N.H.
John and Paul, thanks for the advice and suggestions. I will be visiting the NAPA store tomorrow. I knew I could count on this site for good help. Bob
I am glad to see the paste worked for you. Just a reminder for future use
should you ever need it: you may want to visit the POR15.com site for
tank sealer. They say it will seal up small pinhole cracks rusted out
I have used it on solid non-leaking tanks and it is great.
9 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests