This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Electrolysis tank
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 49
- Joined: Thu Jul 31, 2003 2:04 pm
Electrolysis tank
I'm getting ready to set up my electrolysis tank and was wondering what I should be looking for in regards to max amp setting on the battery charger? Thanks in advance, I read this forum every day and am amazed at all the great information that is shared.
Capt. Paul Ret.
Oswego, NY
Oswego, NY
-
- Team Cub Guide
- Posts: 3543
- Joined: Sun Feb 02, 2003 6:30 pm
- Zip Code: 38658
- eBay ID: Cub-Bud
- Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
- Circle of Safety: Y
- Location: MS, Pope
- David C
- 10+ Years
- Posts: 611
- Joined: Tue Dec 02, 2003 9:17 pm
- Zip Code: 47141
- Tractors Owned: 1949 Farmall Cub, 1970 135 Massey Ferguson, 1970 175 Massey Ferguson, 1964 Cub Cadet Model 70. 1977 Farmall 140 (Granpa's)
- Location: Marysville, Indiana
Did alot of research before putting my tank together and the more amps the better, yet keep in mind the 100% duty cycle rating of your charger. Don't over tax your Charger!!!
http://www.oldengine.org/members/billd/ ... olysis.htm
http://www.stovebolt.com/techtips/rust/ ... usting.htm
http://www.google.com/search?hl=en&lr=& ... %A0results
David C.
http://www.oldengine.org/members/billd/ ... olysis.htm
http://www.stovebolt.com/techtips/rust/ ... usting.htm
http://www.google.com/search?hl=en&lr=& ... %A0results
David C.
I may be old but I got to see all the cool bands
- johnbron
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
I use this method all the time, in fact I have a part in the tank a bubblin away as I am typing this. Just looked at the meter and it is at 4-amps now on my 6-amp charger. When I use my 10-amp auto it can get as high as 10-amps, The trick is the closer the 2 parts are together the more amps will be drawn but DO NOT LET THEM TOUCH each other. I have found that more amps equal faster cleaning.
Then came Bronson
-
- 10+ Years
- Posts: 251
- Joined: Sun Feb 09, 2003 10:05 pm
- Location: MS, Oxford
Hi CaptPaulret,
When you set up your vat and place the metals; that is the anode and the
piece of metal you are wanting cleaned; space the metal pieces about 3-4 inches apart. Turn on the charger and check the ammeter it should read at "least" 2 amps. If not slowly move the parts closer together [never
letting them touch]. until you get at least a 2 amp reading. You should be able to get between a 4 & 6 amp reading which does a better and faster
job of cleaning.
Also, some additional notes from experience:
1). Find an old piece of no. 6 awg hard drawn copper wire [like the power
companies use for vertical grounds on their poles] or go to an
electrical supply house and buy about 12 inches and a fargo
electrical bronze connector.
2). Use the fargo connector to attach one end of the no. 6 wire to the
anode.
3). Extend the wire to outside of the vat and attach the "positive" lead
from the battery charger.
This is done to get the charger lead connector "outside" the solution which
is very corrosive and will in short order eat up the end of your lead.
4). "Never" set up the vat in an enclosed building. The gas produced can
ignite.
Good luck and here is saying, "many clean CUB parts and implements
to you". I am sure you will be pleased with this process and you will
not be using harmful chemicals that can harm you or mother nature.
When you set up your vat and place the metals; that is the anode and the
piece of metal you are wanting cleaned; space the metal pieces about 3-4 inches apart. Turn on the charger and check the ammeter it should read at "least" 2 amps. If not slowly move the parts closer together [never
letting them touch]. until you get at least a 2 amp reading. You should be able to get between a 4 & 6 amp reading which does a better and faster
job of cleaning.
Also, some additional notes from experience:
1). Find an old piece of no. 6 awg hard drawn copper wire [like the power
companies use for vertical grounds on their poles] or go to an
electrical supply house and buy about 12 inches and a fargo
electrical bronze connector.
2). Use the fargo connector to attach one end of the no. 6 wire to the
anode.
3). Extend the wire to outside of the vat and attach the "positive" lead
from the battery charger.
This is done to get the charger lead connector "outside" the solution which
is very corrosive and will in short order eat up the end of your lead.
4). "Never" set up the vat in an enclosed building. The gas produced can
ignite.
Good luck and here is saying, "many clean CUB parts and implements
to you". I am sure you will be pleased with this process and you will
not be using harmful chemicals that can harm you or mother nature.
- artc
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
- Contact:
http://www.holzwerken.de/museum/links/e ... tion.phtml
check this site for an explanation of the electrochemical process.
check this site for an explanation of the electrochemical process.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
Who is online
Users browsing this forum: No registered users and 38 guests