The nub on this PTO lever is sheared in half just like the pic on TM's web site. I'm thinking I can make a new nub by turning a shoulder on a piece of round stock then press out the old one and replace it with my newly turned piece. I am wondering if it will wiggle out and cause trouble?
thanks!
Stanley
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
PTO shifter lever repair
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 66
- Joined: Tue Apr 29, 2003 10:18 am
- Location: Al, Huntsville
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
That stub is hardened steel. If you make one, you can use an old drill bit shank and weld it in. Good used replacements are available reasonably priced.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 237
- Joined: Wed Jul 09, 2003 11:03 am
- Location: Danville, Indiana
- Peter S
- 10+ Years
- Posts: 69
- Joined: Fri Jul 18, 2003 11:24 am
- Zip Code: 01085
- Tractors Owned: 1951 cub
1963 cub - Location: Massachusetts
Who is online
Users browsing this forum: Dave Downs and 60 guests