Pan seat

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
10+ Years
10+ Years
Posts: 731
Joined: Sun Mar 14, 2004 10:00 pm
Location: LA, Hammond

Pan seat

Postby Joey » Sun Mar 28, 2004 8:32 pm

Has anyone ever repaired the folded lip that goes around the edge of the pan seat? The seat on my '51 Cub has half of the folded edge missing from rustout and I was wondering how to repair the seat.

User avatar
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada

Postby Rudi » Sun Mar 28, 2004 8:37 pm


I don't think I would bother trying to fix it. You are probably better off buying a used seat, unless of course you want it padded. Then you can get it from OEM, Steiner, Chown Tractor Parts or a few other places. Also, if you have access to another pan seat cheaply, you can open up the crimp and have it redone as well.

Yust me dos centavos!
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
Posts: 22631
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Sun Mar 28, 2004 8:52 pm

Or do like me and go the cheap way. Get a cushion that slips over it with an drawstring. They are available at most farm supply stores.
If you are not part of the solution,
you are part of the problem!!!

PAUL K. in N.H.
10+ Years
10+ Years
Posts: 694
Joined: Tue Feb 04, 2003 6:17 am
Location: NH, Ossipee

Postby PAUL K. in N.H. » Sun Mar 28, 2004 9:15 pm

Hi Joey

I believe that JPTRACTOR salvage has those slip covers that John is talkng about for $10:00 , you can even get a red and white one. GOOD LUCK Paul K. in N.H.

User avatar
George Willer
Cub Pro
Cub Pro
Posts: 7013
Joined: Sun Feb 02, 2003 9:36 pm
Zip Code: 43420
Circle of Safety: Y
Location: OHIO, Fremont

Postby George Willer » Sun Mar 28, 2004 9:42 pm


When I built the tricycle I didn't have any seats except for two badly rusted out ones. They were full of holes and looked like doilies. I decided to try a repair with fiberglass thinking I could cover them with the tie on cushions. It worked fine and I still don't have the cushions I got from J.P.'s on yet. They look fine as is.

It won't cost you very much to try it.
George Willer

The most affectionate creature in the world is a wet dog. Ambrose Bierce

10+ Years
10+ Years
Posts: 731
Joined: Sun Mar 14, 2004 10:00 pm
Location: LA, Hammond

Pan seat

Postby Joey » Sun Mar 28, 2004 10:51 pm

I thought about covering it up with a seat cover, but I love a challenge of trying to restore something back to its original condition (or close to it). I've read some very interesting and talented repair jobs on this board, and I was hoping someone did a seat crimping job. The seat has a sharp edge where the crimping is gone and may cut the seat cushion. I may take you advice Mr. Willer, and try to give a fiberglass edge to the seat. If it comes out OK, I'll try to post a picture. Thanks for the help!

Jim Becker
Team Cub
Team Cub
Posts: 13466
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Pan seat

Postby Jim Becker » Sun Mar 28, 2004 11:31 pm

Joey Quebedeaux wrote:I may take you advice Mr. Willer, and try to give a fiberglass edge to the seat.

If you want to give that a try, I would suggest you start with a piece of heavy gage wire to form the edge of the seat. Some sheet metal may help fill in any gap from the remaining seat to the wire. Then use fiberglass to complete the repair.

10+ Years
10+ Years
Posts: 731
Joined: Sun Mar 14, 2004 10:00 pm
Location: LA, Hammond

Postby Joey » Mon Mar 29, 2004 4:35 pm

Good idea, Jim. The wire will add a little beef and some roundness to the edge. I'll let y'all know how it comes out.

10+ Years
10+ Years
Posts: 83
Joined: Sat Nov 22, 2003 8:29 am
Location: Iowa

Postby Wireharness » Sat Apr 03, 2004 8:00 pm

You can purchase K&M seats from Easy Bob's Tractor parts at Tipton IN.

He is a Distributor for them.


  • Similar Topics
    Last post
  • Pan Seat vs Deluxe Seat Attachment(s)
    by w30bob » Wed May 02, 2018 1:47 pm » in Farmall Cub
    by BohemianJon
    Thu Jun 07, 2018 4:17 pm
  • Lo boy seat Attachment(s)
    by jrenn » Sat Jun 25, 2016 4:12 pm » in Farmall Cub
    by jrenn
    Sun Jul 03, 2016 9:58 pm
  • Seat Repair
    by Didymus » Fri Dec 15, 2017 6:37 pm » in Farmall Cub
    by Super A
    Fri Dec 15, 2017 7:43 pm
  • Deluxe seat Attachment(s)
    by john2189 » Sat Oct 21, 2017 8:28 am » in Farmall Cub
    by Super A
    Sun Oct 22, 2017 8:53 am
  • Seat Cushions Attachment(s)
    by T-Mo » Mon Jul 31, 2017 6:07 am » in Farmall Cub
    by Dale Finch
    Mon Jul 31, 2017 9:42 am

Return to “Farmall Cub”

Who is online

Users browsing this forum: brewzalot, DanielPutnam, sford, tenn terry t and 6 guests