With many of us going to shows with a mower and such, we want to be safe with a mower. As has been suggested i have built a mower guard for my 4 1/2 foot c-22 mower. The basic principle of this guard will remain the same, just the length will be different.
1. using 1x8 standard pine board, cut two pieces to 52"
2. Rip two pieces that are two inches wide and 52" long.
3. Using 3" wood screws (decking screws) square up all four boards and screw together.
4. Paint to suit your tastes.
5. Procure 6 eye hooks
6. Install them in equal thirds on the bottom of the guard.
7. Install on your mower, and using a long bungy cord, wrap around the hooks.
John
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
C-22 Mower Guard
- John(videodoc)
- 10+ Years
- Posts: 6547
- Joined: Mon Jul 25, 2005 10:16 pm
- Zip Code: 61944
- Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
-(Woods 59")
Corn Stalk Cutter
23a Disc
&
2005 Mahindra w/FEL - Circle of Safety: Y
- Location: IL, Paris just off of Interstate 70
- Contact:
Who is online
Users browsing this forum: No registered users and 1 guest