As I was lubing up things on my 48, that I have only had for about a year, I noticed I completly ignored this fitting last year after I bought it. Anyway it looks as though it hasn't had a grease gun on it in a while. The manual says 2-3 pumps. I pumped a few extra since it looked so clean and didn't feel any resistance, even on the last pump.
Should I feel resistance, like a front end fitting? Should I put more in? I gave about 8 pumps.
Thanks, Andy
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
PTO Grease Fitting
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- treesitter
- 10+ Years
- Posts: 132
- Joined: Mon Apr 21, 2003 1:40 pm
- Zip Code: 44039
- Tractors Owned: 48 Cub
73 Cub Cadet
48 C
49 M - Location: North Ridgeville, Ohio
PTO Grease Fitting
All she did when she first saw it was stand there looking at it, shaking her head,
while my buddy and I stood there drinking beer, grinning over my fine purchase.
while my buddy and I stood there drinking beer, grinning over my fine purchase.
-
- 10+ Years
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Treesitter - rather than pump it full of grease, run the pto with no load for a while to help distribute the grease. Then, when you feel it has had time to lube the entire bearing, add a couple more shots. You won't feel much resistance as there really isn't anything to push against.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- treesitter
- 10+ Years
- Posts: 132
- Joined: Mon Apr 21, 2003 1:40 pm
- Zip Code: 44039
- Tractors Owned: 48 Cub
73 Cub Cadet
48 C
49 M - Location: North Ridgeville, Ohio
- George Willer
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
- Contact:
Andy,
Under normal use that bearing gets lubed all it needs from the transmission. The fitting is there so you can lube the bearing when the PTO is used for long periods without the tractor moving... such as when doing belt work.
Under normal use that bearing gets lubed all it needs from the transmission. The fitting is there so you can lube the bearing when the PTO is used for long periods without the tractor moving... such as when doing belt work.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
- treesitter
- 10+ Years
- Posts: 132
- Joined: Mon Apr 21, 2003 1:40 pm
- Zip Code: 44039
- Tractors Owned: 48 Cub
73 Cub Cadet
48 C
49 M - Location: North Ridgeville, Ohio
Thanks for the explaination. I guess it probably has all the grease it needs for sure now . That certianly explains why the fitting looks as though a grease gun hasn't been on it for some time.
May have more questions over the next couple days- trying to catch up on items I haven't delt with since I got the Cub. Although I always try to refer to the manuals and search this forum before I post a question. Just took the oil pan off last night as it has been leaking around the gasket since I got it. Up inside it looked pretty good and clean for 50 years old but the bottom of the pan was nasty.
Searched the forum for gear lube type earlier- sounds as though the 80w-90 I bought will suffice? Whats in it does not look like Hytran, just old gear lube. I assume my local tractor supply has the 90w specified in the manual (?) but the local auto parts didn't.
Thanks for all the help.
May have more questions over the next couple days- trying to catch up on items I haven't delt with since I got the Cub. Although I always try to refer to the manuals and search this forum before I post a question. Just took the oil pan off last night as it has been leaking around the gasket since I got it. Up inside it looked pretty good and clean for 50 years old but the bottom of the pan was nasty.
Searched the forum for gear lube type earlier- sounds as though the 80w-90 I bought will suffice? Whats in it does not look like Hytran, just old gear lube. I assume my local tractor supply has the 90w specified in the manual (?) but the local auto parts didn't.
Thanks for all the help.
All she did when she first saw it was stand there looking at it, shaking her head,
while my buddy and I stood there drinking beer, grinning over my fine purchase.
while my buddy and I stood there drinking beer, grinning over my fine purchase.
Who is online
Users browsing this forum: farmallcubkid and 18 guests