[phpBB Debug] PHP Warning: in file [ROOT]/includes/functions.php on line 4493: ob_start(): output handler 'ob_gzhandler' conflicts with 'zlib output compression'
Farmall Cub • View topic - Loader for H

Loader for H

Thu Oct 25, 2007 11:15 pm

Are there many options available to put a loader on an H. Mine is a 1943. Won't need to do much with it, move some manure, maybe a little gravel. A trip bucket would be fine. Can they be found in working order very easily? About how much do you see them go for?

Fri Oct 26, 2007 8:07 am

There are a lot of them around, setting in barn lots, etc, both IH and aftermarket in the 450 to $250 range. Most of the ones for an M will also work on an H by changing or turning over the front mounting brackets. The big thing to watch for is the cylinders being internally rusted to the point they cannot be economically repaired. I got into that on the loader for the H that members of the board restored for me. Even though the cylinder was closed, the inside was to the point it would have cost $700 to repair them.

Fri Oct 26, 2007 3:01 pm

I wonder if this one would work? Seems a little pricey, though.

http://www.tractorshed.com/cgi-bin/photoads/classifieds.cgi?search_and_display_db_button=on&db_id=191276&query=retrieval

Fri Oct 26, 2007 7:44 pm

I believe that will bolt right up to your tractor, though you will need to add control valves and make some plumbing changes. Price is a little high, but not too bad considering it's shape.

I see I mistyped earlier, I meant to say $50 to $250 range.

Mon Oct 29, 2007 2:01 pm

I do not know much about the H / M and 300 / 400 tractors other than they were basically different sheet metal on the same basic structures. Knowing this, here is a loader that may be worth investigating. The price sure is right, and at the very least, it looks like the basics and a good starting point.

http://cgi.ebay.com/INTERNATIONAL-FRONT ... dZViewItem

Good luck,
Bill

Mon Oct 29, 2007 8:41 pm

I have one on a 330 that I think will fit you can have it for $ 100 but I am in Va
David

Mon Oct 29, 2007 9:22 pm

The utility series tractors were low slung, and loaders for them do not typically work well on the H/M series.

Mon Oct 29, 2007 9:49 pm

David Bennett wrote:I have one on a 330 that I think will fit you can have it for $ 100 but I am in Va
David


Does it work well? Got any pics? I'm not so familiar with loaders or hydraulics, would I need to add a control valve with it? If it is a trip bucket that only lifts, i.e., no down pressure, I wouldn't need a control valve right? Sure am interested if we could fire up the express to get it closer. That is a long way. Thanks David.

Mon Oct 29, 2007 9:58 pm

John said it would not work well on a H or M
David

Mon Oct 29, 2007 10:01 pm

Oh, I read 330 as 350 and got excited. I'll keep looking. Thanks anyway.

Tue Oct 30, 2007 9:34 pm

Trent M wrote:I wonder if this one would work? Seems a little pricey, though.

http://www.tractorshed.com/cgi-bin/photoads/classifieds.cgi?search_and_display_db_button=on&db_id=191276&query=retrieval


Doesn't sound like a bad price to me if it is in as good working order as claimed. Course not as good a price as the "super deal" I got on the IH 1701 loader I bought for $350. Of course later I paid $300 for a new bucket, $100 to have a cylinder rebuilt, $150 to have new bushings welded on and pins made, $100 to have it sandblasted, $80 a gallon for primer and paint, and . . . . .

Hmmm, the deal you're looking at sounds pretty reasonable to me after all!