This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
TOB
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 62
- Joined: Tue Feb 04, 2003 2:02 pm
- Location: Central Texas
TOB
I finally found time to replace my TOB, I went ahead and put another new style bearing in. I'll report on the results as soon as I fire up the tractor. My question is: Can I run the tractor w/o connecting the hydraulic lines? It would sure simplify things if I have to split it again not to have to drain the hydraulic fluid. Will I damage the hydraulic pump by running it a 5-10min w/o the lines/fluid in place? Thanks as always.
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Yes, you can damage the pump that way. If you need to run the engine without hooking up the hydraulic lines, remove the pump. It is only 2 bolts. Very little oil will be thrown out the pump opening. If you are going to run the tractor any amount without the pump, cut a temporary pump opening cover out of cardboard.
Who is online
Users browsing this forum: Bill V in Md and 19 guests