1948 Farmall H

Farmall H, HV & Super H, 1939-1954

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Postby WKPoor » Mon Dec 17, 2007 6:26 pm

Ron, heres the deal.
You can resleeve only to the next size jump. So your H can be a Super with the Tisco kit. However if you elect to rebore make sure you jump to the 350 size which I think is 172cu. or 179cu. I have the 3 9/16 bore because mine started out as a Super 164cu. and has the Tisco kit to jump one size. Stay with your H head unless you like to spend money. Just mill it down and raise the compression a little. Buy the new manifold that matches the Super H carb. Fairly cheap and money well spent IMO. I'll and post some pics on all this. Most of what you seek I have already been there done that and used it. There were a few hickups along the way but the bugs where worked out.
WKPoor
5+ Years
5+ Years
 

Postby TJ » Mon Dec 17, 2007 8:55 pm

RonHarper wrote:Thanks TJ for the tip. Oh by the way, are you familiar with the lift all hydraulic set up. Can it be installed on a non hydraulic H. Maybe I will put that question in a new post if I dont get too many answers here. Thanks TJ.


Ron,
As John said it can be easliy done . One thing is if you can find a pump with a #8 on it or a later casting code it it should be of the 800 pound pressure pump. Not the 600 pound pressure as was the earlier pumps. THen you can look for chicken teeth to find the auxiallary valve to give you 2 way pressure. I 've got one on my M works great.
1972int.cub , c-3 int mower , 54a blade
1950 M farmall "under construction"

If a word is misspelled in the dictionary who would know? from uncle johns bathroom reader
TJ
5+ Years
5+ Years
 
Posts: 291
Joined: Sun Dec 10, 2006 10:43 am
Location: AR. Pocahontas
Zip Code: 72455

Postby RonHarper » Wed Dec 19, 2007 8:14 pm

Thanks WKPoor and TJ. Great info. It will really help. Ill keep you updated on my progress.
1949 Cub S/N 95854 "Ellis"
" It's not the size of the tractor in the fight, but the size of the fight in the tractor ".
User avatar
RonHarper
5+ Years
5+ Years
 
Posts: 228
Joined: Sun Jul 08, 2007 10:57 am
Location: Broken Arrow. Oklahoma
Zip Code: 74014

Postby WKPoor » Wed Dec 19, 2007 11:11 pm

Here is the tractor now. Still no paint and I seem to be partial to the no sheetmetal appearance.
Image
Image
I have yet to install the power steering unit. I currently have the motor down repairing loose wrist pins. Previous builder issue! The bolster weights shown are really rare. I also have a set of creeper gears to put in. Spent 2yrs finding them. Front and rear tires and rims are new. Seat assembly was completely rebuilt.
Image
Image
This is a 169cu. motor with 180psi cranking pressure. SuperH carb too.
Image
The throttle mod really smooths up the throttle. The shaft Earl made for me out of stainless. It idles perfectly in first slot and full throttle in the last.
WKPoor
5+ Years
5+ Years
 

Previous

Return to Farmall H & Super H

Who is online

Users browsing this forum: No registered users and 2 guests