This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
WICO Mag on cub, help needed
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
WICO Mag on cub, help needed
My '49 has the WICO magneto as described in the engine group of the parts manual (very lightly). As I am going through the complete maintenance for the first time, I would like to put in new points and condenser and time the beast. However, I can find no information on how to get parts or how to adjust this magneto - let alone why it is on some cubs. Any and all information on this magneto as it pertains to cubs would be appreciated.
-
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
Scott check out Rudi's manual site for the service manual.
Binder Books is a good source for hard copies of the parts book and service manual. they are at http://www.binderbooks.com/
http://www.cleancomputes.com/Cub/index.html is Rudi's link.
if your mag doesn't work anymore Call Mark @ Marks Magneto's 860-887-1094 he rebuilds them.
you have a J4 mag that was standard equipment on the cub untill mid 1950, i believe. distributer ignition was a popular option from the first cub as it was marketed as the 'latest' technology. but many people preferred the mag early on as it did not require a battery to start.
Binder Books is a good source for hard copies of the parts book and service manual. they are at http://www.binderbooks.com/
http://www.cleancomputes.com/Cub/index.html is Rudi's link.
if your mag doesn't work anymore Call Mark @ Marks Magneto's 860-887-1094 he rebuilds them.
you have a J4 mag that was standard equipment on the cub untill mid 1950, i believe. distributer ignition was a popular option from the first cub as it was marketed as the 'latest' technology. but many people preferred the mag early on as it did not require a battery to start.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Scott, are you sure it is a Wico mag, and not a J4? So far as I know the Wico was only used on the ealry 47 models. A 49 should have had an IH J4 mag. The J4 has a lead that comes out of the cas on top and goes to the distributer cap. the Wico coil is under the cap and doesn't have the extra high tension lead. Possibility yours may have been changed at sometime.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 17
- Joined: Sat May 17, 2003 9:48 pm
- Location: Winchester, Virginia 22603
-
- 10+ Years
Yes it is a WICO mag. No center lead - rather an internal line to the coil. I have all the manuals from Binder. The WICO is mentioned in the parts manual, but not the service manual. Surprisingly there is no mention of the WICO in the electrical service bulletin either. My Cub runs fine, but I would like to know how to work on the mag I have. My serial number maps to a '49, but perhaps the WICO was swapped on some time in the past. This is the first I have heard that they were standard on the earliest tractors - I had been told that many cold weather ones came equipped with WICO. If anyone has a manual for an early tractor that talks about the WICO mag, I would like to get a copy of the relevant sections from you. Thanks.
PS Just talked with the folks at Montage enterprises about Mott mower parts - very helpful people and much cheaper than I expected. I can replace 10 lost cutters along with connectors for under $20. That should tell me if I need to have the shaft straightened or not. I knew a few were missing but did not realize 10 were gone - 7 of them on one end, 3 on the other. I imagine that may play a role in the excessive vibration I was getting.
PS Just talked with the folks at Montage enterprises about Mott mower parts - very helpful people and much cheaper than I expected. I can replace 10 lost cutters along with connectors for under $20. That should tell me if I need to have the shaft straightened or not. I knew a few were missing but did not realize 10 were gone - 7 of them on one end, 3 on the other. I imagine that may play a role in the excessive vibration I was getting.
-
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
shoot, John.. i didn't know there was any other mag than the J4 for the cub's.
learn sumptin' new every day.
happy to hear Missy is purrin'. it'll be time to go fetch her soon.
learn sumptin' new every day.
happy to hear Missy is purrin'. it'll be time to go fetch her soon.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
Scott,
I have a Wico X on a tractor that doesn't show it in the manuals either. There are 4 different mags listed for a Case SC, but the Wico isn't one of them. I played it by ear to get the tractor running a few years ago and it has performed flawlessly ever since. It's my pulling tractor.
I have a Wico X on a tractor that doesn't show it in the manuals either. There are 4 different mags listed for a Case SC, but the Wico isn't one of them. I played it by ear to get the tractor running a few years ago and it has performed flawlessly ever since. It's my pulling tractor.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
The famous picture of # 501 shows a J-4 magneto. The Wico isn't in the early parts book, but is in the late. The part number suggests maybe a mid-'50s date. My PM Manual from '61 covers the Wico magneto for the 240 and 340 but not the Cub. I assume the Wico was made available when a magneto was needed after the J-4 was no longer being produced. I believe Binder Books has the PM Manual.
By the way, the point gap should be .015.
By the way, the point gap should be .015.
-
- 10+ Years
- Posts: 395
- Joined: Sun Feb 02, 2003 10:34 pm
- Location: Long Island, NY
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
I told you my memory was undependable!Jim Becker wrote:The famous picture of # 501 shows a J-4 magneto. The Wico isn't in the early parts book, but is in the late. The part number suggests maybe a mid-'50s date. My PM Manual from '61 covers the Wico magneto for the 240 and 340 but not the Cub. I assume the Wico was made available when a magneto was needed after the J-4 was no longer being produced. I believe Binder Books has the PM Manual.
By the way, the point gap should be .015.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
What is the minimum needed for cub to run?
by Brandon966 » Fri Apr 01, 2022 6:40 am » in Farmall Cub - 7
- 406
-
by SamsFarm
Sat Apr 02, 2022 1:39 pm
-
-
- 38
- 1849
-
by Grant
Mon Oct 09, 2023 9:28 am
-
- 7
- 301
-
by Clemsonfor
Sun May 29, 2022 10:20 pm
-
- 25
- 651
-
by inairam
Tue Aug 24, 2021 7:08 am
-
-
C-2 mower design suggestions needed Attachment(s)
by Bob McCarty » Wed May 26, 2021 10:03 am » in Farmall Cub - 13
- 421
-
by Waif
Wed Jun 02, 2021 11:23 am
-
Who is online
Users browsing this forum: taiterhead and 5 guests