I'm getting ready to install the wheel weights on the H. What is the proper size bolt for this? I want to install 2 sets, and I have 2 sets of whole weights and 1 set of half (split) weights. I was thinking that it would be easiest to install a set of whole weights first, and then install the half weights onto them.
Also, I don't have a manual, how do you properly mount the second set? If I remember correctly, you mount the first weight using 4 bolts of ? size to the wheel, then install the second weight using ? bolts of ? size to the first weight? Anyone have pics?
H wheel weight bolts
Moderator: Team Cub
6 posts
• Page 1 of 1
-
Trent M - Cub Pro
- Posts: 2803
- Joined: Wed Aug 09, 2006 6:21 pm
- Location: Illinois Southern
- Zip Code: 62859
by Don McCombs » Wed Jan 02, 2008 4:01 pm
Trent, this may help some. Go to this link and click on Page 239.
http://www.cleancomputes.com/Cub/H%20-%20HV/TC-27D%20Parts%20Catalog/index.html
http://www.cleancomputes.com/Cub/H%20-%20HV/TC-27D%20Parts%20Catalog/index.html
Don McCombs
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
-
Don McCombs - Cub Pro
- Posts: 9487
- Joined: Mon Feb 03, 2003 6:45 am
- Location: MD, Deep Creek Lake
- Zip Code: 21550
- Tractors Owned: .
"1950 Something" Farmall Cub
1977 IH Cub w/FH
1948 Farmall Super A
1951 Farmall Super C w/FH 
- Circle of Safety: Y
by Trent M » Wed Jan 02, 2008 4:17 pm
Don McCombs wrote:Trent, this may help some. Go to this link and click on Page 239.
http://www.cleancomputes.com/Cub/H%20-%20HV/TC-27D%20Parts%20Catalog/index.html
Help some? Don, that answers all the questions. Thank you much!!
Trent McPeak
Cub Database
Cub Database
-
Trent M - Cub Pro
- Posts: 2803
- Joined: Wed Aug 09, 2006 6:21 pm
- Location: Illinois Southern
- Zip Code: 62859
by WKPoor » Wed Jan 02, 2008 8:17 pm
Trent, I installed 2 dowels in each wheel that are about 12" long. That way I just slide the weights on over the dowels and secure them with square headed bolts of the proper length depending on how many weights I put on. This allows me to change them very fast and by myself. The dowels are about flush with the wheel outside edge. A 12" dowel will accept up to 4 weights per side. They are threaded just on the end to allow room for a nut on the inside and out. Smooth the rest of the way and rounded on the end. I can install all 8 in just a few minutes or vary the amount.
- WKPoor
by John *.?-!.* cub owner » Wed Jan 02, 2008 10:20 pm
definitely not politcially correct, but I mounted my first set with regular bolts, and used threaded rod with a separate set of nuts per weight for the additionals. The book says to use the closer ot the middle holes to mount the first set, and the outer ones to hold the rest to th first.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
-
John *.?-!.* cub owner - Team Cub
- Posts: 17772
- Joined: Sun Feb 02, 2003 2:09 pm
- Location: Mo, Potosi
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
by KETCHAM » Wed Jan 02, 2008 11:09 pm
Thanks guys!!!I hope to get my weights from John at Georges cub-fest.This helped out !!!Now I don't have to ask.Thanks Don and all!!!Kevin 
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
-
KETCHAM - 501 Club
- Posts: 5453
- Joined: Thu Jul 28, 2005 2:37 pm
- Location: Marshallville Ohio
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests
|
|