Farmall Cub

by **Boss Hog** » Sun Mar 02, 2008 9:37 pm

I got tired of the 6 volt system on my 140 [ as it is a working tractor and not a trailer queen ] I took a generator bracket off of a super A and mounted it in place of the generator bracket on the 140. Then took a piece of flat steel and made a bracket to fit the alternator. I welded this to the bracket off the super A. It made for a nice bracket for the alternator.
I will take some pics and add tomorrow.
David

works nice out of the way

by **smigelski** » Mon Mar 03, 2008 10:07 pm

I will get pictures of my conversion it is almost the same as yours but a different bottom bracket

by **smigelski** » Tue Mar 04, 2008 5:26 pm

Here is a pic I will get a closer shot tom.

by **spaceghost** » Tue Mar 04, 2008 6:59 pm

Dave
What kind on air compressor is that?

by **Boss Hog** » Tue Mar 04, 2008 7:25 pm

spaceghost wrote:Dave
What kind on air compressor is that?

Its a farm Hand from TSC it is a 3 cylinder I like it
David

by **deputy jailer** » Wed Mar 05, 2008 1:26 am

That alternator looks familiar

by **Boss Hog** » Wed Mar 05, 2008 6:01 am

deputy jailer wrote:That alternator looks familiar

It should

by **deputy jailer** » Thu Mar 06, 2008 10:12 pm

by **NawlensGator** » Sat Mar 08, 2008 4:55 pm

This is how I mounted alternators on my 140's. I used 3 wire set up vs a 1 wire so it charges at lower rpm's.

[/img]http://img173.imagevenue.com/img.php?loc=loc595&image=46854_DSC00028_122_595lo.JPG

[/code]

by **NawlensGator** » Sat Mar 08, 2008 5:09 pm

Try again;

by **NawlensGator** » Sat Mar 08, 2008 5:11 pm

by **NawlensGator** » Sat Mar 08, 2008 5:13 pm

by **spaceghost** » Sat Mar 08, 2008 7:13 pm

NawlensGator
I got your pictures working again,

by **smigelski** » Sun Mar 09, 2008 4:55 pm

here is the bracket I made for the 100

by **spaceghost** » Mon Mar 10, 2008 5:42 pm

NawlensGator photes are working now.

Farmall Cub

140 Alternator installation pics added

140 Alternator installation pics added

Share On:

Who is online